Explanation Of Controls - Panasonic TDA200 User Manual

Explanation of Controls

PAUSE:
Used to insert a pause when storing
a telephone number in programming.
FWD/DND:
Used to perform Call Forwarding
and Do Not Disturb.
CONF (Conference):
multiple-party conversations
INTERCOM:
Used to make and receive
extension to extension calls.
AUTO ANS (Auto Answer)/MUTE:
Used to received an incoming call in hands-free
mode, or to mute the microphone during a
conversation.
AUTODIAL/STORE:
System/Personal Speed Dialing, or for storing
program changes.
TRANSFER:
Used to transfer a call to
another party.
REDIAL:
Used to redial the last number
dialed.
Used to establish
.
Used for
3
MESSAGE:
Used to call back to voice mail
when a message is left in your mailbox.
FLASH/RECALL:
Used to disconnect the
current call and make another call without
hanging up.
HOLD:
Used to place a call on hold.
SP-PHONE (Speakerphone):
hands-free operation.
Navigator/Volume Key:
volume, or display contract or select desired
items. (display phones only)
CANCEL:
Used to cancel the selected item.
(Display phones only)
PROGRAM:
Used to enter programming
mode. (Non-Display phones only)
Flexible CO:
Used to access outside lines.
Also programmable as another extension
(DSS) or a One-Touch Speed Dial access
button.
Used for
Used to adjust