Disassembly; Removing And Replacing The Battery Cover And Battery - Motorola V3 Service Manual

Digital wireless telephone

Hide thumbs Also See for V3:

Table of Contents

Disassembly

This section provides instructions for the disassembly of V3x telephones. Tools and

equipment used for the phone are listed in Table 1, preceding.

Many of the integrated devices used in these phones are vulnerable to damage from

ESD. Ensure adequate static protection is in place when handling, shipping, and

servicing the internal components of this phone.

Avoid stressing the plastic in any way to avoid damage to either the plastic or

internal components.

All batteries can cause property damage and/or bodily injury, such as burns, if a

conductive material, such as jewelry, keys, or beaded chains, touches exposed

terminals. The conductive material may complete an electrical circuit (short circuit)

and become very hot. Use care in handling any charged battery, particularly when

placing it inside a pocket, purse, or other container with metal objects.

Ensure the phone is turned off.

Press down on the battery latch and then slide the battery cover as shown in

Figure 1.

Battery Cover

Figure 1. Removing the Battery Cover

Lift the battery cover away from the phone.

January 31, 2006

Battery Cover latch

V3x

051209o

6809497A15-A

Table of Contents

V3x