Nokia N8-00 Service Manual page 31

49) Press and hold both of the two shown screws in.
51) Hold the BOTTOM COVER in its place and tighten
the TORX + size 4 screws to the torque of 21 Ncm on
both sides.
31
50) Then place the BOTTOM COVER as shown and
press it into its place. If the BOTTOM COVER does not
go in properly, loosen up the side screws a bit.
52) Nokia N8-00 assembly is now complete.
Confidential | Copyright © 2010 Nokia | All rights reserved
Service Manual Level 1&2
-END OF ASSEMBLY-
Nokia N8-00
RM-596
Version 3.0