Table of Contents
Advertisement
Troubleshooting Guide
DANGER
Before servicing unit, wait for all moving parts
to come to a complete stop. Turn engine off
and remove the spark plug wire.
PROBLEM
Loss of Vacuum.
Unusual vibration
or noise.
Unit difficult to close.
SERVICE AND MAINTENANCE
POSSIBLE CAUSE
1. Blower, hose or hood inlet clogged.
2. Bags full.
3. Fan blades bent or broken.
4. Poly mesh plugged.
1. Solid object jammed in unit.
2. Loose or missing bolts on unit.
3. Bent or damaged fan.
1. Obstructions keeping door from
completely closing.
2. Hood hinge bolts too tight.
1. Remove hose and clean inlet.
2. Inspect and empty.
3. Replace/repair impeller.
4. Clean poly mesh.
1. Check and remove any
2. Tighten or replace bolts.
3. Replace/repair impleller.
1. Clear obstructions.
2. Loosen bolts.
17
CORRECTION
obstruction.
Advertisement
Table of Contents
