Setup of Optional PCI Board
IMPORTANT:
To enable the fault-tolerant feature of the optional device, the identical PCI boards must be
installed to the slots with the same number in CPU/IO module 0 and CPU/IO module 1.
The BIOS settings need to be modified when mounting some optional PCI boards. To
change the BIOS settings, start the BIOS setup utility to change the [OS Boot Monitoring]
configuration in [Server] – [Monitoring Configuration]. See page 4-28 for more details.
For the supported connecting devices, contact your sales agent.
N8804-007 1000BASE-T 2ch board set
IMPORTANT:
For LAN cable's connector, use a RJ-45 connector which is compliant with IEC8877 standard.
If any other connector is used, it may not be removed easily.
List of slots to install optional PCI boards
Refer to "List of option PCI boards and installable slots" on page 8-32.
Driver installation procedure
You do not need to install drivers for N8804-007 board because they are included in the OS.
After installing the boards, refer to 3-8 "Duplex LAN Configuration" to set the dual LAN.
System Upgrade 8-39