LG LNP3700T series Owner's Manual

OWNER'S MANUAL
Network Dome Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LNP3700T series
LNP2800 series
LNP2800I series
Specifications
Item LNP3700T LNP2800
Image Sensor 4.5 mm (1/4 type) CCD
Lens x37 Zoom, F1.5(Wide End), x28 Zoom, F1.5 (Wide End) ,
F4.1(Tele End) (f = 3.5 mm F3.0 (Tele End) (f = 3.5 mm to
to 129.5 mm) 98 mm)
Resolution Up to 704 x 480 (NTSC), 704 x 576 (PAL)
Minimum B/W 0.01 lx (Sens-up OFF), 0.000 01 lx (Sens-up ON)
Illumination
Color 0.2 lx (Sens-up OFF), 0.003 lx (Sens-up ON)
ICR Day/Night Support
Image Enhancement Backlight Compensation, Exposure Control, Sens Up Control,
AGC, White Balance, Privacy Masking, Digital Zoom, EIS
Optical Zoom x37 x28
Panning Range & Speed 0 ˚ to 360 ˚, Maximum 500 ˚/Second
Tilting Range & Speed 0 ˚ to 180 ˚, Maximum 500 ˚/Second
Auto Panning 2 to 8 points
Preset 256
Group Touring Maximum 10 Groups
Pattern 4 EA
Auto Tracking Support No Support
Video Compression H.264, MJPEG
Frame Rate 30/25 fps @ D1 (N/P) + 30/25 fps @ CIF (N/P)
Multi-Streaming Dual Streaming
Audio Compression G.726, G.711
2-way Audio Support
Motion Detection Support
Event Notification Relay Out, Email, FTP, Preset(on Sensor)
Pre Event Buffering Support
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
• Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions.
• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
AB28
LNP2800I
Video In/Out 1 BNC Out
Audio In/Out 1/1
Alarm In/Out 4/2
Ethernet 10/100 Ethernet
Security Password Protection, HTTPS (SSL, TLS)
Protocol IPv4 TCP/IP, HTTP, HTTPS, RTP, RTSP, UDP, DHCP, ICMP, FTP, SMTP, NTP,
ARP, SNMPv1/v2c/v3, DDNS(LG)
IPv4/v6 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP
Open Protocol ONVIF 2.2 Profile S,PSIA 1.1
Remote S/W LVi510, Mobile application (iPhone, Android, iPad)
Connections Up to 10
Protection IP66, Vandal Proof
Power Source AC 24 V
Power Consumption Maximum 25 W
Input Current 1.8 A
Operating Temperature -20 ˚C to 50 ˚C
Operating Humidity 0 % RH to 80 % RH
Weight 4.17 kg
Dimension (ØxH) 234.6 mm x 269.9 mm
Warning Disposal of your old appliance
• Do not install this equipment in a
confined space such as a bookcase or
similar unit.
• Wiring methods shall be in accordance
with the National Electric Code, ANSI/
NFPA 70.
• This is a class A product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
• To reduce a risk of fire or electric shock,
do not expose this product to rain or
moisture.
Caution
• This installation should be made by a
qualified service person and should
conform to all local codes.
• To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
• The apparatus shall not be exposed to
water (dripping or splashing) and no
objects filled with liquids, such as vases,
shall be placed on the apparatus.
To disconnect power from mains, pull
EEE Compliance with Directive.
out the mains cord plug. When installing
(for Turkey only)
the product, ensure that the plug is easily
accessible.
Important Safety Instructions
LG Electronics hereby declares
that this/these product(s) is/are 1.
in compliance with the essential 2.
requirements and other relevant 3.
provisions of Directive 2004/108/EC 4.
and 2011/65/EU.
5.
6.
Contact office for compliance of
7.
this product:
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The
Netherlands
Part Names and Functions
LNP2800I series for Indoor
a
b
c
d
e
f
g
h
No Support
i
Maximum
21 W
1.4 A
j
-10 ˚C to 50 ˚C
2.5 kg
205.8 mm x
k
269.9 mm
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
1. When this crossed-out apparatus (including amplifiers) that
wheeled bin symbol is produce heat.
attached to a product
9. Do not defeat the safety purpose of
it means the product is
the polarized or grounding-type plug.
covered by the European A polarized plug has two blades with
Directive 2002/96/EC.
one wider than the other. A grounding
2. All electrical and electronic
type plug has two blades and a third
products should be grounding prong. The wide blade or the
disposed of separately from
third prong are provided for your safety.
the municipal waste stream
If the provided plug does not fit into
via designated collection your outlet, consult an electrician for
facilities appointed by the replacement of the obsolete outlet.
government or the local
10. Protect the power cord from being
authorities.
walked on or pinched particularly at
3. The correct disposal of plugs, convenience receptacles, and the
your old appliance will help
point where they exit from the apparatus.
prevent potential negative
11. Only use attachments/accessories
consequences for the specified by the manufacturer.
environment and human 12. Use only with the cart, stand, tripod,
health.
bracket, or table specified by the
4. For more detailed manufacturer, or sold with the apparatus.
information about disposal When a cart is used, use caution when
of your old appliance,
moving the cart/apparatus combination
please contact your city
to avoid injury from tip-over.
office, waste disposal
service or the shop
where you purchased the
product.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
Read these instructions.
personnel. Servicing is required when
Keep these instructions.
the apparatus has been damaged in any
Heed all warnings.
way, such as power-supply cord or plug
Follow all instructions.
is damaged, liquid has been spilled or
Do not use this apparatus near water.
objects have fallen into the apparatus, the
Clean only with dry cloth.
apparatus has been exposed to rain or
Do not block any ventilation openings.
moisture, does not operate normally, or
Install in accordance with the
has been dropped.
manufacturer's instructions.
a BNC connector cover cap LNP3700T/LNP2800 series for
b Video output BNC connector Outdoor
c Data Port A (RJ-45)
a
Input data port for alarm (relay) signal.
b
RS-485 data communication is not
c
available.
d Data Port B (RJ-45)
d
Output data port for alarm (relay) e
signal.
f
e AUDIO IN (Line Level Input)
Input for a mono microphone, or a line-
g
in mono signal.
f AUDIO OUT (Line Level Output)
Connect to an active speaker with a
built-in amplifier.
g Power input jack
h ETHERNET Port
Connects to a PC or a network via a
hub with a 10 BASE-T/100 BASE-TX
cable attached RJ-45 connector.
i Locking screw
Tighten this screw to fixing the Ceiling
Mount Assembly with camera body.
j Dome Cover open button
k Dome Cover
h
Handling of the unit
Be careful not to spill water or other liquids on
the unit. Be cautious not to get combustible or
metallic material inside the body. If used with
foreign matter inside, the camera is liable to
fail or to get cause of fire or electric shock.
• Remove dust or dirt on the surface of the
lens with a blower.
• Use a dry soft cloth to clean the body. If it
is very dirty, use a cloth dampened with a
small quantity of neutral detergent then
wipe dry.
• Avoid the use of volatile solvents such
as thinners, alcohol, benzene and
insecticides.
They may damage the surface finish and/
or impair the operation of the camera.
Operating and storage
location
Avoid viewing a very bright object (such as
light fittings) during an extended period. Avoid
operating or storing the unit in the following
locations.
• Extremely hot or cold places (operating
temperature -20 °C to 50 °C, however, we
recommend that the unit be used within
a temperature range of 0 °C to 45 °C)
• Damp or dust place
• Places exposed to rain
• Places subject to strong vibration
• Close to generators of powerful
electromagnetic radiation such as radio
or TV transmitters.
a BNC connector cover cap
b Video output BNC connector
c Alarm In Data Terminal
Input data terminal for alarm (relay)
signal.
d Alarm Out Data Terminal
Output data terminal for alarm (relay)
signal.
e AUDIO IN (Line Level Input) / AUDIO
OUT (Line Level Output)
Input for a mono microphone, or a line-
in mono signal. Connect to an active
speaker with a built-in amplifier.
f Power input Terminal
This camera must always be operated
AC 24 V. Certified/Listed Adaptor which
comply with LPS.
g ETHERNET Port
Connects to a PC or a network via a
hub with a 10 BASE-T/100 BASE-TX
cable attached RJ-45 connector.
h Dome Cover