VIPedge
The Basics
LCD Contrast
Brightness Control
Dial Pad and Button
Beeps
16
Available on backlit telephones and backlit add-on module.
To adjust the LCD contrast on the backlit telephones
1. Press and hold down the Mic button.
2. Press and release Vol or Vol repeatedly.
Holding the Vol button does not continue to change the setting. The
Note:
button must be pressed for each step of contrast change.
To adjust the LCD contrast on the Add-on Module
1. Press Hold+3+6+9 (simultaneously).
Contrast +
2. Press
button to increase contrast.
Contrast -
3. Press
button to decrease contrast.
4. Lift the handset off-hook / on-hook to save settings.
Holding the softkey does not continue to change the setting. The
Note:
softkey must be pressed for each step of contrast change
Available on backlit telephones with 4-line LCD's and backlit add-on module.
To change the LCD backlight brightness for IP5131-SDL or
IP5631-SDL
1. Press Hold+3+6+9 (simultaneously).
Others
2. Press the
softkey.
BL Bright
3. Press the
4. Enter a value of 0~3 using the dialpad. (0 = dim; 3 = brightest)
Set
5. Press the
softkey twice.
IP telephones can emit a "beep" whenever a dial pad or feature button is
pressed. The "beeps" are On by default. Follow these steps to turn the
"beeps" On or Off.
1. Press 3+6+9+Hold (simultaneously).
2. Press Sound.
3. Press Keybeep.
4. Select On/Off.
5. Press Set to set the option.
6. You must also go off-hook, then on-hook to exit the program mode.
TOSHIBA
softkey.
VIPedge UG
12/12