GE MDS SD Series Reference Manual page 137

LINKTEST
LOG
LOGOUT
MDS 05-4846A01, Rev. C
—Listen Before Transmit Enable
BEHAVIOR=<choices>
—Listen on transmit
TX
—Listen on receive
RX
MINPERIOD=<unsigned 16 bits>
MAXPERIOD=<unsigned 16 bits>
TIMEOUT=<unsigned 16 bits>
—CSMA Mode
MODE=<choices>
—Discard packet
drop
—Send packet
send
CLEARRSSI=<signed 8 bits>
Optional arguments as follows:
DESTADDR=<unsigned 16 bits>
COUNT=<ranged unsigned 32 bits>
—Minimum Value
1
—Maximum Value
1000000
TIMEOUT=<ranged unsigned 16 bits>
—Minimum Timeout (ms)
10
—Maximum Timeout (ms)
10000
—Lin test timeout (ms)
ENABLE=<choices>
—Link test off
OFF
—Link test on
ON
TXPKTCOUNT=<unsigned 32 bits>
RXPKTCOUNT=<unsigned 32 bits>
BITCOUNT=<unsigned 32 bits>
BITERRORS=<unsigned 32 bits>
Sets or displays the event log information, and displays the number of
entries in the event log. Optional arguments are used to clear or display
the log.
Optional arguments:
—Clear the event log
CLEAR
—Show the event log
SHOW
—Number of event log entries in log. Read only.
TOTAL
—Displays all settable optional arguments and their current values.
CMD
You can copy this list to a text file as a record of your configuration.
Logs the user out of the command interface.
SD Series Ref. Manual (Packet & Transparent Mode)
—Minimum sampling period
—Maximum sampling period
—CSMA Timeout
—Clear channel RSSI Reference
—Destination Unit Address
—Link test requests to send
—Link test timeout (ms)
—Packet TX Count
—Packet RX Count
—Total Bit Count
—Total Bit Errors
129