Specifications; Basic Specifications - Toshiba ST-71 SERIES Owner's Manual

10. SPECIFICATIONS

10. SPECIFICATIONS

10.1 Basic Specifications

Item
Input voltage
DC output voltage
Operating temperature
Relative humidity
Dimensions 15-inch LCD 359.9 mm (W) x 388.1 mm (D) x 371.4 mm (H)
12-inch LCD 295.0 mm (W) x 386.8 mm (D) x 323.5 mm (H)
Weight 15-inch LCD 12.5 Kg
12-inch LCD 11.5 Kg
Power cord
CPU
BIOS ROM
RAM Capacity
Type
Interface
Display interface
LCD Interface
Touch panel method
Hard Disk Drive (HDD)
LAN interface
PC card
CF card
MCR
Sound generator
Support OS
AC 100V-240V +10%, -10% 50/60Hz 5.0A (115V)-2.5A (230V)
DC24V +5%, -5%
5°C to 35°C
10% to 80%RH (no condensation)
A power cord is not included in this product. Please use one complied with
each country's safety standard. For details, please contact the nearest
TOSHIBA TEC service representative.
®
Intel Celeron 2.0 GHz with 128 KB secondary cache
1MB Flash ROM
Standard 256MB (Max. 2GB)
Max. 1GB/slot can be equipped.
DDR SDRAM PC2100/2700, 2.5V unbuffered type, ECC/non ECC 184-pin
DDR SDRAM DIMM connector, 2 slots installed
RS-232C x 6 (Standard: 4 + Option: 2), Parallel x 1, P-USB x 1, USB x 2,
Drawer x 2 (24V type), PS/2 x 2, 24VDC OUT (DIN 3-pin) x 1
VGA x 1 channel (on-board, standard)
Standard LVDS1 x 1, LVDS1 + LVDS2 (Option)
Analog resistor film
Max. 2 units of 2.5-inch HDD (option) can be connected.
10 BASE-T, 100 BASE-TX (Wake on LAN support)
PCMCIA TYPE II x 1 (option)
CF card TYPE II x 1 (option)
ISO-1,2-track one-sided type (option)
AC97 interface; LINE OUT x 1, MIC IN x 1, Built-in speaker (Monaural
sound)
Windows 2000, Windows XP, Certified Linux
10- 1
Description
EO1-12031
10.1 Basic Specifications