Preparation Before Use; Automatic Operation; Dry Operation; Eco Operation - Toshiba RAS-10 Owner's Manual

PREPARATION BEFORE USE

2
Preparing Filters
1. Open the air inlet grille and remove the air fi lters.
2. Attach the fi lters. (see detail in the accessory sheet).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Clock Setup
1. Push by tip of the pencil.
If timer indication is fl ashing, go to the next step 2.
2. Press or : adjust the time.
3. Press : Set the time.
Remote Control Reset
Push by tip of the pencil or
1. Remove the batteries.
2. Press .
3. Insert the batteries.
3 AIR FLOW DIRECTION
FIX
Press : Move the louver in the
1
desired vertical direction.
SWING
Press : Swing the air
2
automatically and press again to stop.
3
For horizontal direction, adjust manually.
Note:
• Do not move the louver manually by others.
• The louver may automation positioning by some operation mode.

REMOTE CONTROL

4
1 Infrared signal emitter
2 Start/Stop button
3 Mode select button (MODE)
4 Temperature button (TEMP)
5 Fan speed button (FAN)
6 Swing louver button (SWING)
7 Set louver button (FIX)
8 On timer button (ON)
9 Off timer button (OFF)
! Setup button (SET)
" Clear button (CLR)
# Memory and Preset button (PRESET)
$ One-Touch button (ONE-TOUCH)
% High power button (Hi-POWER)
& Economy button (ECO)
( Quiet button (QUIET)
) Comfort sleep button (COMFORT SLEEP)
~ Filter reset button (FILTER)
+ Set clock button (CLOCK)
, Check button (CHECK)
- Reset button (RESET)
Note: The provided Remote Controller is a wireless type, which also can be used as a
wire. Please see "How to Connect The Remote Controller for Wired Operation",
located in installation instruction, in case of wired control is required.
ONE-TOUCH
5
Press the "ONE-TOUCH" button for fully automated operation that is customized
to the typical consumer preferences in your region of the world. The customized
settings control temperature air fl ow strength, air fl ow direction and other settings
to provide you alternate contact with "ONE-TOUCH" of the button. If you prefer
other settings you can select from the many other operating functions of your
Toshiba unit.
ONE-TOUCH
Press : Start the operation.
TSB_1110650165.indb 3 TSB_1110650165.indb 3
To automatically select cooling or fan only operation
1. Press
2. Press
3. Press
To automatically control room temperature and airfl ow for faster cooling operation
(except in DRY and FAN ONLY mode)
10
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Note: Cooling operation; the set temperature will increase automatically 1 degree/
1
11
In case of the misplaced or discharged remote control
#
4
2
6
3
5
SWING FAN
7
(
$
ONE-TOUCH FIX QUIET
12
%
&
Hi POWER
"
COMFORT
8 9
SLEEP
) !
, -
+ ~

AUTOMATIC OPERATION

6
MODE
1. Press : Select A.
2. Press : Set the desired temperature.
FAN
3. Press : Select AUTO, LOW , LOW+
HIGH .
COOLING / FAN ONLY OPERATION
7
MODE
: Select Cool or Fan only
: Set the desired temperature.
Cooling: Min. 17°C, Fan Only: No temperature indication
FAN : Select AUTO, LOW , LOW+
or HIGH .
8

DRY OPERATION

For dehumidifi cation, a moderate cooling performance is controlled automatically.
MODE
1. Press : Select Dry .
2. Press : Set the desired temperature.
Hi-POWER OPERATION
9
Press Hi POWER : Start and stop the operation.

ECO OPERATION

:
Press Start and stop the operation.
hour for 2 hours (maximum 2 degrees increase).

TEMPORARY OPERATION

• Pressing the RESET button, the unit can start or
stop without using the remote control.
• Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.

TIMER OPERATION

Set the timer when the air conditioner is operating.
Setting the ON Timer
Press : Set the desired
1
ON timer.
2
Press : Set the timer.
3
Press : Cancel the timer.
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Everyday Timer
1
Press : Set the ON timer.
2
Press : Set the OFF timer.
• During the every day timer is activating, both arrows ( , ) are indicated.
Note:
• Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
• The setting will be saved for the next same operation.
, MED , MED+ , or
.
, MED , MED+ ,
Setting the OFF Timer
Press : Set the desired OFF
timer.
Press : Set the timer.
Press : Cancel the timer.
3
Press .
Press : button during the
4
( or ) mark fl ashing.
9/3/2012 10:45 9/3/2012 10:45
ES
FR
IT
DE
PT
PL
CZ
RU
CR
HU
TR
NL
GR
SV
FI
NO
DK
RO
BG
EE
LV
SK
SI