D-Link DES-1228/ME User Manual page 100

Enter a name for the ISM VLAN into the VLAN Name field and choose a VID between 2 and 4094. Entries in these two fields
must not have been previously configured on the switch or an error message will be prompted to the user. Once these two fields
have been filled, click the Apply button, which will automatically adjust the current window to resemble the following window.
Figure 7- 21. IGMP Snooping Multicast VLAN Settings – Add window modified
Both the Add and Modify windows of the IGMP Multicast VLAN Settings have the following configurable fields.
Parameter Description
VLAN Name Enter the name of the new Multicast VLAN to be created. This name can be up to 32 characters
in length. This field will display the pre-created name of a Multicast VLAN in the Modify window.
VID Add or edit the corresponding VLAN ID of the Multicast VLAN. Users may enter a value between
2 and 4094.
State Use the pull-down menu to enable or disable the selected Multicast VLAN.
Member Port Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the
untagged members of the multicast VLAN.
Tagged Member
Enter a port or list of ports that will become tagged members of the Multicast VLAN.
Port
Source Port Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the tagged
members of the multicast VLAN.
Replace Source
This field is used to replace the source IP address of incoming packets sent by the host before
IP
being forwarded to the source port.
Click Apply to implement settings made.
To return to the IGMP Snooping Multicast VLAN Entries window, click the
Entries. To edit the Group List Settings for a particular entry click the corresponding Modify button, the following window will
appear.
DES-1228/ME Layer 2 Fast Ethernet Managed Switch
87
hyperlinked Show IGMP Snooping Multicast VLAN