Shadow Tours; Programming A New Shadow Tour - GE 16X PTZ User Manual

22 GE 16X PTZ Camera
User Manual

Shadow tours

A shadow tour is a tour that the camera "learns" by recording your manual pan, tilt, and zoom operations.
When programming a new shadow tour, you use a keypad to direct the camera through the desired PTZ
movements. The camera stores the movements you performed in memory. The recorded tour can be replayed at
any time.

Programming a new shadow tour

To program a new shadow tour, do the following:
1. From MAIN MENU, select TOUR MENU.
2. From TOUR MENU, select TOUR1
SHADOW TOUR (Figure 42).
3. From NEW SHADOW TOUR, press iris + to
start the timer (Figure 43).
REC flashes on the monitor, and the USED
percentage will increase while moving the
camera through the tour.
Note: The maximum length of the shadow tour is
variable and is dependant on the number of PTZ
operations running in the tour recording. When more
quick PTZ hybrid movements are made, less
programming time is available for the shadow tour.
4. Move the camera through the desired
movements.
5. Press iris + to stop the recording and exit the
shadow tour menu.
Note: If the camera remains stationary while recording
a shadow tour, the percentage of memory used should
not increase until the camera moves again.
Shortcuts to programming the Shadow Tour
For KTD-405 keypad:
1. At the normal operating display, bring up the PROGRAM SHADOW TOUR display by pressing and
holding the esc key, and then press the tour key.
Figure 42. TOUR MENU
TOUR1 SHADOW TOUR
TOUR2 PRES
TOUR3 PRES
TOUR4 PRES
TOUR5 PRES
Figure 43. NEW SHADOW TOUR menu
RECORDING
RECORDING
USED 0%
W TOUR [1]
ESET TOUR ET TOUR [2]
ESET TOUR ET TOUR [3]
ESET TOUR ET TOUR [4]
ET TOUR [5]
ESET TOUR