Philips HTB3525B User Manual page 15

• Make the necessary connections described
in quick start guide, and then switch the
TV to the correct source for your Blu-ray
Surround Base .
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
ETHERNET
ETHERNET
1
Using a network cable, connect the
ETHERNET connector on your Blu-ray
Surround Base to the network router.
2
Press .
3
Select [Setup], and then press OK.
4
Select [Network] > [Network
installation] > [Wired (Ethernet)].
5
Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
6
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
network settings].
Set up the wireless network
Your Blu-ray Surround Base has a built-in Wi-Fi
for easy access to a wireless network.
What you need
•
1
2
www
3
4
5
Personalize the network name
Name your Blu-ray Surround Base to easily
identify it on your home network.
1
2
3
4
5
A network router (with DHCP enabled).
For best wireless performance, coverage,
and compatibility, use 802.11n router.
w w w
Press .
Select [Setup], and then press OK.
Select [Network] > [Network
installation] > [Wireless (Wi-Fi)], and
then press OK.
Follow the onscreen instructions to select
and set up the wireless network.
If connection fails, select [Retry], and
•
then press OK.
Select [Finish], and then press OK to exit.
• To view the network settings, select
[Setup] > [Network] > [View
wireless settings].
Press .
Select [Setup], and then press OK.
Select [Network] > [Name your
Product:].
Press the Alphanumeric buttons to enter
the name.
Select [Done], and then press OK to exit.
EN 13