Advanced; Icr And Ir - D-Link DCS-2330L User Manual

Section 3: Configuration
Here you can configure the ICR and IR settings. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic: The Day/Night mode is set automatically. Generally,
the camera uses Day mode and switches to Night
mode when needed.
Day Mode: Day mode enables the IR Cut Filter.
Night Mode: Night mode disables the IR Cut Filter.
Schedule Mode: Set up the Day/Night mode using a schedule. The
camera will enter Day mode at the starting time and
return to Night mode at the ending time.
IR Light Control: The camera can enable or disable the IR (infrared)
light according to your preferences. This setting
provides additional controls depending on your
specific application.
Off: The IR light will always be off.
On: The IR light will always be on.
Sync: The IR light will turn on when the ICR sensor is on.
Schedule: The IR light will turn on or off according to the
schedule that you specify below.
D-Link DCS-2330L User Manual

Advanced

ICR and IR

55