Command Center Function Keys - Bosch Security System User Manual

Command Center Function Keys

Your keypad has five function keys. These keys are used to control
your system.
COMMAND
Use the COMMAND bar in combination with one or two
numeric keys to perform a function.
ENT/YES
The ENT (Enter)/YES key has two functions. The first is to
complete the entry of your passcode at the command enter. When
ever a function requires that you enter your passcode at the keypad,
first press the digits of the code and then press the ENT key. Your
system does not recognize your passcode until you press ENT.
The second function of the ENT/YES key is to select the menu
item displayed. Some menu items require your personal passcode
be entered before starting the function. Remember to press ENT
after entering your passcode.
ESC/MENU
The ESC (Escape)/MENU key has two functions. First, the ESC/
MENU key is used to enter the Command Menu. Pressing this
key when at idle text takes you to the first item in the menu.
Second, pressing ESC returns to the idle display.
PREV (Previous)
When viewing a list, pressing the PREV key takes you back to the
previously shown item.
NEXT
Press the NEXT key to pass over the present item in a menu or
list.