HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide June 2007 (Second Edition) Part Number 331901-00B...
Page 2
The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty.
BSMI Notice............................. A-1 Korean Notice............................A-2 Laser Compliance............................. A-2 Appendix B Electrostatic Discharge Overview ..............................B-1 Grounding Methods...........................B-1 Appendix C Specifications HP NC6170 Gigabit Server Adapter Specifications..................C-1 Fiber Cable Specifications.........................C-2 HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide...
About This Guide This guide can be used for reference when installing the HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter. WARNING: To reduce the risk of personal injury from electric shock and hazardous energy levels, only authorized service technicians should attempt to repair this equipment.
In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. For HP technical support: • In the United States and Canada, call 1-800-652-6672. • Outside the United States and Canada, refer to www.hp.com HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter User Guide...
Introduction Overview The HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adapter is a high performance, stand-alone Ethernet adapter with a single, integrated, dual port controller chip that delivers 1000 Mb/s Ethernet over fiber cabling. For best performance, install the adapter in a 64-bit/133MHz, PCI-X slot.
Introduction Figure 1-1: NC6170 Gigabit Server Adapter LED Indicators The HP NC6170 Gigabit Server Adapter LED indicators operate as described in the following table. Table 1-1: LED Operations for the HP NC6170 Gigabit Server Adapter Status Description ACT/LINK Link to the adapter is established. The adapter is receiving power and the cable connection is secure.
NOTE: Before removing the cover of your server, refer to the HP documentation for the proper methods for installing a PCI card and avoiding electric shock hazards.
3. Replace the server cover and plug in the power cord. Connecting the Network Cable The HP NC6170 Gigabit Server Adapter uses LC fiber ports. These ports support multimode fiber with a maximum cable length dependent on the fiber type, mode, and cable size. Refer to Appendix C for maximum cable lengths.
August 1, 1976. Compliance is mandatory for products marketed in the United States. This device is classified as a Class 1 laser product as defined by IEC 60825-1. HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide...
• Use a portable field service kit with a folding static-dissipating work mat. If you do not have any of the suggested equipment for proper grounding, have an HP authorized reseller install the part. NOTE: For more information on static electricity or assistance with product installation, contact your HP authorized reseller.
• • VCCI Class B EN55024-1 • • BSMI Class A • • CISPR 22 Class B Canada UL • • EN60950 ICES-003 Class B • MIC Class B HP NC6170 Dual Port PCI-X 1000SX Gigabit Server Adpater User Guide...
Specifications Fiber Cable Specifications To connect to the network, the NC6170 Server Adapter uses a 1000Base-SX fiber transeiver with an LC fiber connector. Table C-2 describes the mode, cable size, and maximum distance specifications for this adapter. Table C-2: Fiber Cable Maximum Distances for 1000Base-SX...