Advertisement
2
Install the wall side metal mounting bracket to the wall
● When installing, please use the eligible expansion screws or screws to ensure the support to the TV set and "wall bracket"
and keep both sides at the same level (not tilted) when installing to the wall.
● Installation method of the wall side metal mounting braket
① Remove the fixed screw B
② Set the "angle adjustment part" flat
③ Install by using the commercially available screws. he angle of the "angle adjustment part" to original point.
Fixed screws
Angle adjustment
span
12
C100047_WAL14C_EN.indd
12
Fixed screws
1 0 m m o f t h e e x p a n s i on s c r e w
threads shall be left out side of the
Market available
wall when it is embedded in the
mounting bolts
wall. Secure the wall bracket to the
or screws
expansion screws and be sure a
maximum of 15mm distance is
allowed from the screw tip to the
wall surface.
If the distance is more than 15mm,
the installation of the TV set and
"wall bracket" will fail since the fixed
screws for "TV fix bracket" may face
against the expansion screws.
468mm
400mm
Screw hole
at
8 6
Screw hole
at
13 6
L
Fixed screws
Market
available mounting
bolts or screws
Installation points using expansion screws
clamping
nut
Within 15mm
R
washer
Expansion
screw
Wall bracket
2010/12/15
13:34:13
Advertisement
