Mount Into The Dashboard - Philips CEM3100 User Manual

a Green/black strip Left speaker (Rear)
b White/black strip Left speaker (Front)
c Gray/black strip
d Purple/black strip Right speaker (Rear)
e Red
f Blue
g Blue/white
h Black
i Yellow
3
i
j
10 EN
Right speaker (Front)
Ignition key +12V DC
when ON/ACC
Motor/electric antenna
relay control lead
lead
Ground
To the +12V car
battery which is
energized at all times
h
f
g
Connector
1 ANTENNA
2 FRONT LINE OUT
R (Socket)
3 FRONT LINE OUT
L (Socket)
4 REAR LINE OUT R
(Socket)
5 REAR LINE OUT L
(Socket)
6 OE REMOTE
(Purple)
7 TEL MUTING (Blue) To cellular phone
SUBWOOFER (Blue) Subwoofer
8
9 REAR AUX LINE
OUT R
10 REAR AUX LINE
OUT L
Tip
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.

Mount into the dashboard

1
If the car does not have an on-board drive
negative terminal of the car battery.
If you disconnect the car battery in
a car that has an on-board drive or
may lose its memory.
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
Connect to
Antenna
Front right speaker
Front left speaker
Rear right speaker
Rear left speaker
OE Remote
system
Rear Aux right
Rear Aux left