Programming Operations in the Remote Control (Macro
Function)
With the macro function, you can register multiple operations of devices registered to the remote control app in
succession, allowing you to perform the operations in the order registered just by tapping a button.
1. Start the Remote control app.
2. Select and tap the desired device.
3. Tap [
Macros].
4. Tap [New macro].
Register a macro in the following order.
Select a button.
Check the operation (register the timing of the operation).
Input a name for the macro.
Tap [OK], and then follow the on-screen instructions.
If the registration completes, a button with a macro name will appear at the bottom of the remote control
screen. By tapping the button, you can run the registered macro.