Table of Contents
Advertisement
M e s s a g e s
• To define the image size when you insert the image to a
multimedia message, select
• To select the default value for timed slides, select
timing.
• To receive or to block multimedia messages, select
multimedia
reception, and
To receive multimedia messages only in your home network,
select
In home network
• To set the phone to automatically fetch newly received
multimedia message or to reject it from receiving them,
select
Incoming multi- media
Retrieve
or
Reject
Allow multimedia reception
• To define connection settings for retrieving multimedia
messages, select
settings, and activate the set in which you want to save the
connection settings.
• To edit the active settings, select
settings.
Select each of the settings one by one, and key in all the
required settings. Contact your network operator or service
provider for the settings.
• To receive or reject advertisements, select
Yes
or No. This setting is not shown if
reception
is set to No.
E-mail settings
You may receive the e-mail settings as an over the air message
from the network operator or service provider. See Over the air
settings service on page 21.
1. Press Menu, and select
mail
messages.
2. Select
Active e-mail
want to save the settings.
Scale image
Yes
or
(default setting).
messages, and
respectively. This setting is not shown if
is set to No.
Connection settings
Messages
settings, and activate the set in which you
46
down.
No
respectively.
→
Active multimedia
Edit active multi- media
Allow adverts
Allow multimedia
→
Message settings
Default slide
Allow
→
→
E-
Advertisement
Table of Contents
