D-Link DVS-104 User Manual page 48

Video server
Table of Contents

Advertisement

Building Networks for People
"Delay second(s) after event" option to drive some device attached to the digital
outputs several seconds after the event happens. If administrators want to receive some
snapshots to check the event, select the snapshot channels and check "Send snapshot
while trigger condition(s) match". Video Server will take three snapshots of
pre-event, the moment of event, and post-event for selected video channels. If the
snapshots are not enough, more snapshots can be taken after the event by configuring
"Take snapshot(s)" and the "interval after the event" in unit of tenth second. Three
snapshots of each channel can also be downloaded via FTP or HTTP URL. Refer to the
Download Event-triggered Snapshots section for details.
Sequential operation
With this feature, Video Server can upload snapshots periodically to external server as a
live video source. The interval can be set from tenth second to several hours. The
external server must be setup correctly in the Network configuration page.
Sending method
Either event mode or sequential mode can select one method between email and FTP.
The companied external server must be setup correctly in advance. If email is chosen,
the snapshots of selected video channels will be attached in the emails. If FTP is chosen,
administrators can choose to add date and time in the file name of snapshots. If the
snapshots are used as the live video source, the date and time suffix can be eliminated
to update the same source file.
The option "Show alert in image" may be set when running application wizard or
configuring motion detection. Administrators should manually uncheck it if no indication
of motion detection is needed in the image.
DVS-104 User Manual v1.00
- 46 -

Advertisement

Table of Contents
loading

Table of Contents