Table of Contents
Advertisement
64 | HDZ Series 1080p IP PTZ User Manual
3.
4.
5.
6.
7.
To delete a privacy mask:
1.
2.
Camera Settings
This section describes how to set various camera parameters, such as exposure mode, white
balance options, backlight compensation, image flip, auto calibration, speed by zoom, ICR
function, wide dynamic range, and digital noise reduction.
www.honeywell.com/security
If needed, you can change the Transparency, Color, Hsize and Vsize values to edit the
privacy mask. If you edit one or more of these values, be sure to click the appropriate Set
or Add button to save the changes (see
information).
To change the privacy mask position, click Edit Start at the bottom of the Mask Setting
section. The PTZ camera will pan/tilt to the privacy mask position that you have previously
set. The edit privacy mask position controls will appear (see
Figure 5-9
Privacy Mask Editing Position Controls
Click one of either the left, right, up or down arrows to move the camera and the privacy
mask in that direction.
You can change the amount that the camera pans/tilts upon each click of an arrow by
typing a different value in the PT Steps field. Enter a value between 1 (short distance
pan/tilt) and 30 (long distance pan/tilt).
When the privacy mask is positioned and setup as required, click Edit End at the bottom
of the Mask Setting section.
Note
Up to a 10 second delay may occur between completion of editing a privacy
mask position and the Edit End button becoming available.
Navigate to PTZ
Privacy Mask (see
Under Mask Clearing, in the Mask drop-down list, select the number of the privacy mask
that you want to delete, and then click Clear.
Note
If you are clearing all privacy masks, it is recommended that you also disable the
privacy mask feature (see
To create a privacy mask: on page 62
Figure
Figure
5-8).
step 2
in
To create a privacy mask:, page
for more
5-9).
62).
Advertisement
Table of Contents
