Adjustments; Before Starting Adjustment - Sony Cyber-Shot DSC-S600 Service Manual

Before starting adjustment

Precaution on Replacing the SY-145 board
• The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not
required.
• Perform "Initial Language Data Check" mentioned below, and also the adjustment items necessary after SY Board
replacement.
Initial Language Data Check
If the SY-145 board was replaced, initial language setting may be changed. Accordingly, change the following data so
as to set same initial language as that of the set distributing in each region.
Initial language: Language displayed at the next starting if the setting of Setup menu was reset.
Initial Language Data
Page
4F
Note: GP2 is fixed to English.
GP3 is either English, Spanish, or Russian.
GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.
Writing Method:
1) Select page: 00, address: 01 and set data: 01.
2) Select page: 4F, address: 8C, and set the Initial Language Data.
3) Select page: 40, address: 38, and set data: 00.
4) Click
5) Select page: 80, address: 34, and check that the data is "00".
6) Select page: 80, address: 30, and check that the data is "00".
7) Select page: 00, address: 01, and set data: 00.
8) Turn off the camera.
9) Turn on the camera. Execute "Initialize" of Setup screen.
10) Check the language displayed when the camera starts.
DSC-S600_ADJ
It is different from the language setting selectable with the menu.
Address Data Language
00 English
04 Spanish
06 Portugal
8C 08 Simplified Chinese
0B Russian
0D
[Save]
on the SEUS screen.
SECTION 6

ADJUSTMENTS

GP2 GP3
z z
z
z
Korean
6-1
GP4
z
z
z
z
z