Sony HCD-GP6V Service Manual

Micro hi-fi component system

Advertisement

Quick Links

SERVICE MANUAL
Ver 1.2 2004.09
HCD-GP6V is the Amplifier, Video CD/CD player,
Tape Deck and Tuner section in CMT-GP6V.
Amplifier section
The following measured at AC 240 V or AC 120 V, 50/
60 Hz
DIN power output (rated): 20 + 20 W
Continuous RMS power output (reference):
Inputs
MD IN (phono jacks):
MIC (phone jack):
Outputs
PHONES (stereo minijack):
VIDEO OUT (phono jack):
SPEAKERS:
Sony Corporation
9-877-654-03
Audio Group
2004I16-1
Published by Sony Engineering Corporation
© 2004.09
HCD-GP6V
CD
Section
Tape deck
Section
SPECIFICATIONS
(6 ohms at 1 kHz, DIN)
30 + 30 W
(6 ohms at 1 kHz, 10%
THD)
Sensitivity 500 mV,
impedance 47 kilohms
Sensitivity 1 mV,
impedance 10 kilohms
Accepts headphones with
an impedance of 8 ohms or
more
Max. output level 1Vp-p,
unbalanced, Sync
negative, load impedance
75 ohms
Accepts impedance of 6 to
16 ohms.
MICRO HI-FI COMPONENT SYSTEM
Model Name Using Similar Mechanism
CD Mechanism Type
Base Unit Name
Optical Pick-up Name
Model Name Using Similar Mechanism
Tape Transport Mechanism Type
VIDEO CD/CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Wavelength
780 – 790 nm
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Video color system format
NTSC, PAL
Tape deck section
Recording system
4-track 2-channel stereo
Frequency response
50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
E Model
CX-LFAV500
CDM55A-30BD61S
BU-30BD61S
A-MAX.3
HCD-GP5
CMAL1Z240A
— Continued on next page —

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-GP6V

  • Page 1 HCD-GP6V SERVICE MANUAL E Model Ver 1.2 2004.09 HCD-GP6V is the Amplifier, Video CD/CD player, Tape Deck and Tuner section in CMT-GP6V. Model Name Using Similar Mechanism CX-LFAV500 CD Mechanism Type CDM55A-30BD61S Section Base Unit Name BU-30BD61S Optical Pick-up Name A-MAX.3...
  • Page 2: Table Of Contents

    HCD-GP6V TABLE OF CONTENTS Tuner section FM stereo, FM/AM superheterodyne tuner SERVICING NOTES ..........3 FM tuner section Tuning range 87.5 – 108.0 MHz (50-kHz step) GENERAL ..............5 Antenna FM lead antenna Antenna terminals 75 ohms balanced DISASSEMBLY Intermediate frequency 10.7 MHz...
  • Page 3: Servicing Notes

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 4 HCD-GP6V Service Position of the CD Mechanism Deck and VCD Board MAIN Board Extension cable J-2501-225-A (1.00mm/9P/L300) CN802 CD Mechanism Deck (CDM55A-30BD61S) CN806 VCD Board Extension cable J-2501-245-A (1.00mm/23P/L300) Service Position of the Tape Cassette Mechanism Deck MAIN Board Tape Cassette Mechanism Deck...
  • Page 5: General

    HCD-GP6V SECTION 2 This section is extracted from instruction manual. GENERAL List of button locations and reference pages How to use this page Illustration number Use this page to find the location of buttons and other DISPLAY 2 (16, 24) parts of the system that are mentioned in the text.
  • Page 6: Setting The Clock

    HCD-GP6V Setting the clock Remote control ALPHABETICAL ORDER BUTTON DESCRIPTIONS Use buttons on the remote for the operation. ?/1 (power) 1 (7, 8, 15, 21, 22) A – K N – Z Press ?/1 to turn on the system. m/M (fast forward/rewind) ALBUM +/–...
  • Page 7: Top Cabinet, V-Out Board, Dc Fan

    HCD-GP6V SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-5.CONTROL BOARD, 3-6.MAIN BOARD, 3-1.TOP CABINET, 3-7.VCD BOARD, CD MECHANISM DECK SINGLE CASSETTE MECHANISM POWER BOARD V-OUT BOARD, DC FAN (CDM55A-30BD61S) (Page 9) (Page 10)
  • Page 8: Mic/Echo Board

    HCD-GP6V 3-2. MIC/ECHO BOARD 3 two screws (+BVTP 3 × 10) 2 wire (flat type) 6p (CN502) 1 connector 4p (CN501) 4 MIC/ECHO board 3-3. CD MECHANISM SECTION 6 four screws (+BVTP 3 × 10) q; CD mechanism section 1 four claws...
  • Page 9: Front Panel Assy

    HCD-GP6V 3-4. FRONT PANEL ASSY 2 wire (flat type) 6p (CN305) 7 wire 1p (CLP201) 8 front panel assy 3 wire (flat type) 21p (CN302) 5 connector 6p 6 connector 5p (CN201) 1 two screws (+KTP 3 × 12) 3-5. CONTROL BOARD, SINGLE CASSETTE MECHANISM 1 four screws (+BVTP 3 ×...
  • Page 10: Main Board, Power Board

    HCD-GP6V 3-6. MAIN BOARD, POWER BOARD 3 screw (+BVTP 3 × 10) qa four screws (+B 4 × 8) 4 holder heat sink 8 heat sink assy qs silicon shield plate 9 wire (flat type) 6p (CN306) qf power transformer...
  • Page 11: Vcd Board

    HCD-GP6V 3-7. VCD BOARD, CD MECHANISM DECK (CDM55A-30BD61S) 2 two screws (+BVTP 3 × 10) 3 wire assy 1 wire (flat type) 9p (CN803) 4 lid (VCD), shield case 7 wire (flat type) 11p (CN806) 8 two screws (+BVTP 3 × 10) 9 VCD board q;...
  • Page 12: Bd Board

    HCD-GP6V 3-9. BD BOARD wire (flat type) 25p (CN103) wire (flat type) 16p Remove soldering from the four points. BD board claw 3-10. TRAY (CDM55D) 1 While pressing the two protrusions A and B to unlock the two claws as shown, pull the tray in the direction of the arrow C .
  • Page 13: Base Unit (Bu-30Bd61S)

    HCD-GP6V 3-11. BASE UNIT (BU-30BD61S) 8 wire (flat type) 9p (CN105) 7 two insulators 4 two floating screws 1 floating screws (+PTPWH M2.6) 3 two floating screws (+PTPWH M2.6) (+PTPWH M2.6) base unit (BU-30BD61S) 6 two insulators 5 BU holder (BU-30)
  • Page 14: Test Mode

    HCD-GP6V SECTION 4 TEST MODE [Cold Reset] [TC Test Mode] • The cold reset clears all data including preset data stored in Procedure: the RAM to initial conditions. Execute this mode when re- 1. Extract an AC plug. turning the set to the customer.
  • Page 15: Mechanical Adjustments

    HCD-GP6V SECTION 5 MECHANICAL ADJUSTMENTS Precaution Clean the following parts with a denatured alcohol-moistened swab: record/playback heads pinch rollers erase head rubber belts capstan idlers Demagnetize the record/playback head with a head demag- netizer. Do not use a magnetized screwdriver for the adjustments.
  • Page 16: Electrical Adjustments

    HCD-GP6V SECTION 6 ELECTRICAL ADJUSTMENTS Mode: Playback DECK SECTION 0 dB=0.775V test tape Demagnetize the record/playback head with a head demagnetizer. MAIN board P-4-A100 J203 (10kHz, –10dB) Do not use a magnetized screwdriver for the adjustments. speaker terminal oscilloscope After the adjustments, apply suitable locking compound to the parts adjusted.
  • Page 17 HCD-GP6V RFDC signal waveform CD SECTION VOLT/DIV: 200 mV TIME/DIV: 500 ns Note: 1. CD Block is basically designed to operate without adjustment. There- fore, check each item in order given. 2. Use YEDS-18 disc (3-702-101-01) unless otherwise indicated. level: 0.7 ± 0.2 Vp-p 3.
  • Page 18 HCD-GP6V Ver 1.1 Connecting Location: – BD BOARD (Conductor Side) – IC101 (TE) (RFDC) (RFAC) (VC) (FE) IC103...
  • Page 19: Diagrams

    HCD-GP6V SECTION 7 DIAGRAMS • Circuit Boards Location THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards. Note: Note: BD board •...
  • Page 20: Block Diagram - Bd Section

    HCD-GP6V 7-1. BLOCK DIAGRAM — BD SECTION — OPTICAL PICK-UP IC101 DIGITAL SERVO BLOCK IC103 RF AMP DIGITAL SIGNAL PROC. RF AC RFAC +3.3V RFDC RFDC RFDCI PCMD PCMD BCLK I5-10 BCLK I1-6 LRCK LRCK Q101 SECTION DRIVE AVDD(3.3V) CLOK...
  • Page 21: Vcd Section

    HCD-GP6V — VCD SECTION — IC801 IC601 (1/2) IC804 VCD MPEG PROCESSOR SYSTEM CONTROLLER DRAM AUX7 I-CDDATA 2-4, 7-10, DQ0-DQ15 13-28 DBUS0-DBUS15 35-38, 40-43 AUX2 I-CDACK 18-21, A0-A8 4-12 MA0-MA8 AUX6 O-CDSTB 24-28 IC803 O-CDDATA CASH CASL 12-5,27, 68-79, 26,23,25,...
  • Page 22: Main Section

    HCD-GP6V — MAIN SECTION — IC201 POWER AMP IC301 R-CH J201 SOUND PROCESSOR R-CH CH1 IN CH1 OUT R-CH R-CH J202 L-OUT CH2 OUT AUX-L CH2 IN PHONES AUX IN R-OUT R-CH CD-L +VCC Q504 R-CH TUNER-L MUTE -VCC CONT...
  • Page 23: Printed Wiring Board - Bd Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-2. PRINTED WIRING BOARD — BD SECTION — :Uses unleaded solder. BD BOARD (COMPONENT SIDE) • Semiconductor – BD BOARD Location (CONDUCTOR SIDE) M101 Ref. No. Location (SPINDLE) IC101 D-13 IC102...
  • Page 24: Schematic Diagram - Bd Section

    HCD-GP6V • See page 19 for Waveforms. • See page 36 for IC Block Diagrams. 7-3. SCHEMATIC DIAGRAM — BD SECTION — R111 150k C116 (RFACI) RFAC C213 3300p RFSW C112 RF AMP, C109 FOCUS/TRACKING R311 ERROR AMP C119 R104...
  • Page 25: Printed Wiring Board - Vcd Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-4. PRINTED WIRING BOARD — VCD SECTION — :Uses unleaded solder. V-OUT BOARD BD BOARD CONTROL BOARD • Semiconductor CN202 CN102 CN602 Location (Page 32) (Page 23) (Page 30) Ref. No.
  • Page 26: Schematic Diagram - Vcd Section (1/2)

    HCD-GP6V Ver 1.2 • See page 37 for IC Block Diagram. 7-5. SCHEMATIC DIAGRAM — VCD SECTION (1/2) — R801 R802 4.7k 4.7k C830 C803 R832 4.7k R921 R922 R923 R804 C802 R925 R926 R927 R938 2.7k IC803 R939 150k...
  • Page 27: Schematic Diagram - Vcd Section (2/2)

    HCD-GP6V Ver 1.2 • See page 19 for Waveform. 7-6. SCHEMATIC DIAGRAM — VCD SECTION (2/2) — R903 C904 R902 470 6.3V C902 220p C905 Q901 L901 2SA1162-G CN804 C909 C903 R853 470p 8.2k L801 10uH C820 C821 X801 R901...
  • Page 28: Printed Wiring Board - Main Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-7. PRINTED WIRING BOARD — MAIN SECTION — MAIN BOARD • Semiconductor Location TUNER CONTROL MIC/ECHO VCD BOARD BOARD BOARD BLOCK Ref. No. Location CN806 CN605 CN502 D301 (Page 25) (Page 30)
  • Page 29: Schematic Diagram - Main Section

    HCD-GP6V • See page 19 for Waveforms. • See page 37, 38 for IC Block Diagrams. 7-8. SCHEMATIC DIAGRAM — MAIN SECTION — CONTROL CONTROL TUNER BOARD BOARD PACK CN601 CN605 (Page 31) (Page 31) 10.2 RIPPLE FILTER Q411, Q412, Q413, Q414 FAN DRIVER 10.2...
  • Page 30: Printed Wiring Boards - Control Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-9. PRINTED WIRING BOARD — CONTROL SECTION — • Semiconductor Location Ref. No. Location CONTROL BOARD D601 D602 D603 D604 D605 FLUORESCENT INDICATOR TUBE D606 D607 D608 SP,MY D609 IC601 IC601...
  • Page 31: Schematic Diagram - Control Section

    HCD-GP6V • See page 39 for IC Pin Function Description. • See page 38 for IC Block Diagram. 7-10. SCHEMATIC DIAGRAM — CONTROL SECTION — CONTROL BOARD IC603 FLUORESCENT INDICATOR TUBE REMOTE CONTROL RECEIVER IC603 RPM7140-V4 +5V REG T-77 10 50V...
  • Page 32: Printed Wiring Boards - Mic Echo/Phone Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-11. PRINTED WIRING BOARD — MIC ECHO/PHONE SECTION — PHONE BOARD V-OUT BOARD • Semiconductor Location Ref. No. Location D203 PHONES D204 VIDEO OUT D205 D206 D503 IC503 IC504 Q511 Q512...
  • Page 33: Schematic Diagram - Mic Echo/Phone Section

    HCD-GP6V • See page 38 for IC Block Diagram. 7-12. SCHEMATIC DIAGRAM — MIC ECHO/PHONE SECTION — PHONE BOARD MIC/ECHO BOARD IC503 MIC AMP CN501 CN201A PHONES MAIN BOARD CN201 CN203A (Page 29) MIC MUTE MIC MUTE IC504 ECHO PROCESSOR...
  • Page 34: Printed Wiring Board - Power Section

    HCD-GP6V • See page 19 for Circuit Boards Location. 7-13. PRINTED WIRING BOARD — POWER SECTION — POWER BOARD AC IN PT802 SUB POWER TRANSFORMER PT801 AC VOLTAGE POWER TRANSFORMER 110V 120V 220V 240V MAIN BOARD PN401 NOT REPLACEABLE :...
  • Page 35: Schematic Diagram - Power Section

    HCD-GP6V 7-14. SCHEMATIC DIAGRAM — POWER SECTION — POWER BOARD POWER TRANSFORMER Not replaceable : Built in transformer AC VOLTAGE 110V 120V MAIN BOARD 220V PN901 240V (Page 29) T-77 SUB POWER TRANSFORMER T-77 T-77 AC IN T-77...
  • Page 36 HCD-GP6V • IC Block Diagrams – BD Board – IC103 CXA2647N-T4 IC101 CXD3068Q 60 59 58 55 54 53 52 50 49 48 46 45 44 43 42 41 ROM/RW DVDD2 DC OFST ASYE RFDCI – – RFDC TES1 –...
  • Page 37 HCD-GP6V – VCD Board – IC805 BH2220FVM-TR 8bit REG R-2R 8 LD 8bit REG SERIAL R-2R 7 CLK INTERFACE 6 DI 8bit REG R-2R 5 GND POWER ON RESET – MAIN Board – IC301 BD3881FV...
  • Page 38 HCD-GP6V IC201 STK403-040 PRE DRIVER PRE DRIVER IC CH1 IC CH2 BIAS CIRCUIT – CONTROL Board – – MIC/ECHO Board – IC604 BA6956AN IC504 BU9262AFS N. C. DLYVOL 32 MIXIN TESTB 31 MICIN LOGIC INPUT CONTROL 30 VDD INPUT CONTROL LOGIC...
  • Page 39 HCD-GP6V • IC Pin Function Description • CONTROL BOARD IC601 LC876756C-52C3 (SYSTEM CONTROLLER) Pin No. Pin Name Description — Not used (open) — Not used (open) O-CD DATA Data output to the video CD circuit T-SOL Solenoid control signal output to the tape deck...
  • Page 40 HCD-GP6V Pin No. Pin Name Description O-BIAS Bias control signal output to the bias oscillation circuit CD power supply control signal output TUNER Tuner power supply control signal output R-CE Tuner chip enable signal output to the tuner O-BU-CLK Clock output to the echo processor (IC504)
  • Page 41: Exploded Views

    HCD-GP6V Ver 1.2 SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.
  • Page 42: Front Section

    HCD-GP6V 8-2. FRONT SECTION supplied supplied supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-247-757-01 SPR-T, CASS 4-231-841-01 SPRING (HEART CAM-B) X-4955-860-1 LID TC ASSY 4-231-825-01 CAM (B), HEART X-4955-859-1 HOLDER CASSETTE ASSY 4-242-318-01 OIL-DMPR, 70...
  • Page 43: Chassis Section

    HCD-GP6V 8-3. CHASSIS SECTION not supplied not supplied not supplied PT801 supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-247-752-01 RUBBER, FOOT not supplied 0 PT801 A-4750-202-A MAIN BOARD, COMPLETE not supplied...
  • Page 44: Cd Mechanism Deck Section

    HCD-GP6V 8-4. CD MECHANISM DECK SECTION not supplied not supplied M901 base unit (BU-30BD61S) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-674-336-12 LOADING BOARD 4-220-239-01 SPRING, TORSION 4-925-315-31 DAMPER 4-231-777-02 SHEET (KH2) 4-224-894-22 TRAY (CDM55D)
  • Page 45: Base Unit Section

    HCD-GP6V 8-5. BASE UNIT SECTION Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4733-498-A BD BOARD, COMPLETE (A) 4-236-304-02 SPRING (SLED), LEAF 1-782-817-11 WIRE (FLAT TYPE) (16 CORE) 3-372-761-01 SCREW (M1.7), TAPPING 0 203 A-4735-189-A BU-30(61)ASSY The components identified by mark 0 or dotted line with mark 0 are critical for safety.
  • Page 46: Electrical Parts List

    HCD-GP6V SECTION 9 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name. specified in the diagrams or the components •...
  • Page 47 HCD-GP6V CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R103 1-216-845-11 METAL CHIP 100K 1/16W R303 1-216-864-11 METAL CHIP 1/16W R104 1-216-835-11 METAL CHIP 1/16W R308 1-216-864-11 METAL CHIP 1/16W R105 1-216-821-11 METAL CHIP 1/16W...
  • Page 48 HCD-GP6V CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C637 1-162-970-11 CERAMIC CHIP 0.01uF < LED > C638 1-162-927-11 CERAMIC CHIP 100PF C639 1-162-970-11 CERAMIC CHIP 0.01uF LED601 8-719-059-98 DIODE SLR-342VC3F C640 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 49 HCD-GP6V CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R639 1-216-845-11 METAL CHIP 100K 1/10W R696 1-216-845-11 METAL CHIP 100K 1/10W R640 1-216-845-11 METAL CHIP 100K 1/10W R697 1-216-829-11 METAL CHIP 4.7K 1/10W R641 1-216-845-11 METAL CHIP...
  • Page 50 HCD-GP6V LOADING MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-674-336-12 LOADING BOARD C343 1-162-979-11 CERAMIC CHIP 0.0027uF 10% C344 1-104-660-91 ELECT CHIP 47uF ************** < CONNECTOR > C347 1-162-964-11 CERAMIC CHIP 0.001uF C350 1-164-156-11 CERAMIC CHIP 0.1uF...
  • Page 51 HCD-GP6V MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C433 1-104-660-91 ELECT CHIP 47uF D406 not supplied C434 1-126-963-11 ELECT 4.7uF D408 not supplied C435 7-611-032-01 WIRE, TINNING COPPER D409 not supplied C501 1-104-660-91 ELECT CHIP...
  • Page 52 HCD-GP6V MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R215 1-216-833-11 METAL CHIP 1/10W PR410 not supplied R216 1-216-833-11 METAL CHIP 1/10W R217 1-249-422-11 CARBON 2.7K 1/4W < TRANSISTOR > R218 1-249-422-11 CARBON 2.7K...
  • Page 53 HCD-GP6V MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R356 1-249-435-11 CARBON 1/4W R433 1-216-818-11 METAL CHIP 1/10W R357 1-216-826-11 METAL CHIP 2.7K 1/10W R434 1-216-815-11 METAL CHIP 1/10W R358 1-247-847-91 CARBON 4.7K 1/4W R359 1-216-826-11 METAL CHIP 2.7K...
  • Page 54 HCD-GP6V MAIN MIC/ECHO PHONE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R541 1-216-857-11 METAL CHIP 1/10W < DIODE > R542 1-216-833-11 METAL CHIP 1/10W R543 1-216-837-11 METAL CHIP 1/10W D503 8-719-012-92 DIODE UZ-5.1BSA-TP R544 1-249-435-11 CARBON...
  • Page 55 HCD-GP6V Ver 1.2 PHONE POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > C703 1-164-346-11 CERAMIC CHIP C704 1-164-346-11 CERAMIC CHIP JR201 1-216-864-91 METAL CHIP 1/16W C705 1-162-968-11 CERAMIC CHIP 0.0047uF 10%...
  • Page 56 HCD-GP6V Ver 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C853 1-162-923-11 CERAMIC CHIP 47PF < COIL > C854 1-162-923-11 CERAMIC CHIP 47PF C855 1-162-913-11 CERAMIC CHIP 0.50PF 50V L801 1-414-410-21 INDUCTOR 10uH L802 1-414-410-21 INDUCTOR...
  • Page 57 HCD-GP6V V-OUT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R825 1-216-827-11 METAL CHIP 3.3K 1/16W < CONNECTOR > R830 1-216-833-11 METAL CHIP 1/16W R831 1-216-833-11 METAL CHIP 1/16W CN202 1-564-720-11 PIN, CONNECTOR (SMALL TYPE) 4P...
  • Page 58: Revision History

    HCD-GP6V REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2004.05...

Table of Contents