Closing The Computer; Replacing The Drive Cage - HP 79XXY Owner's Manual

8 With a pen or screwdriver, press the metal
latch that holds the battery in its socket. The
battery will pop out.
9 Install the new CR2032 battery in the socket,
with the positive (+) side facing up.
To reassemble the computer:
1 Replace any cards that you removed, and then
replace the add-in card bracket.
2 Replace the drive cage, fan duct, and side
panel (see "Closing the Computer" on
page 21).
3 Reconnect the power cord and all other
cables.
4 Reconnect the modem/phone cable.
5 Turn on the computer and all peripherals.
6 Run the BIOS setup program to reset the date
and time.

Closing the Computer

After you have finished installing memory or
drives, inserting or replacing add-in cards, or
changing the battery, you need to replace the
drive cage, the fan duct, and the side panel.

Replacing the Drive Cage

1 Holding the drive cage at a 45-degree angle,
slide the two nubs (A) on the drive cage into
the guides (B) on the chassis.
upgrading and servicing the pc
A
B
21