Related Manuals for Silvercrest RFH 1863
Summary of Contents for Silvercrest RFH 1863
- Page 1 H O M E T E C H Wireless Headphone Wireless Headphone User manual and service information RFH 1863...
-
Page 3: Silvercrest Wireless Headphones Rfh
Introduction Thank you for choosing a SilverCrest product. These SilverCrest Wireless Headphones RFH 1863 have been designed for receiving wireless high-quality stereo sound from audio playback devices. The range of the wireless signals will be up to 100m (300ft) under optimum conditions, depending on the environment. -
Page 4: Table Of Contents
SilverCrest Wireless Headphones RFH 1863 Contents Introduction ..................... 1 Buttons and Connectors................1 Important Safety Instructions ................3 Danger Through Noise Disturbance............3 Operating Environment ................4 Intended Use ....................4 Maintenance and Care................4 Children ....................... 5 Batteries and Rechargeable Batteries ............5 RF Interface.................... -
Page 5: Important Safety Instructions
SilverCrest Wireless Headphones RFH 1863 Important Safety Instructions Before you use this device for the first time, please read the following notes in this manual and heed all warnings, even if you are familiar with handling electronic devices. Keep this manual safe for future reference. If you sell the device or pass it on, it is essential you hand over this manual also. -
Page 6: Operating Environment
SilverCrest Wireless Headphones RFH 1863 Operating Environment Position the device on a stable, even surface and do not place any objects on the device. The device is not for use in environments with a high temperature or humidity (e.g. bathrooms), and must be kept free of dust. -
Page 7: Children
SilverCrest Wireless Headphones RFH 1863 housing of the device, or the accessories. Only use a clean, dry cloth for cleaning. Never use any corrosive liquids. Children Electrical appliances do not belong in the hands of children. Do not allow children to use electrical devices when not under supervision. Children may not comprehend the presence of potential risks. -
Page 8: Conformity
SilverCrest Wireless Headphones RFH 1863 devices that have not been specifically approved by Targa GmbH GmbH. The user is solely responsible and liable for troubleshooting any interference caused by unauthorized modification of this device and for replacing appliances. Conformity This device has been approved for compliance with the basic and other relevant requirements of the EMC Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC and the R&TTE Directive... -
Page 9: Getting Started
SilverCrest Wireless Headphones RFH 1863 Getting started Package Contents Wireless headphones RFH 1863 with transmitter cradle Plug-type power adapter DB050020D Connection cable, 2m (6ft), 3.5mm jack-type plug to 3.5mm jack-type plug Connection cable, 4m (12ft), 3.5mm jack-type plug to 3.5mm jack-type plug Adapter cable, 30cm (1ft) 3.5mm jack-type plug to 2x Cinch plug... -
Page 10: Connection The Transmitter Cradle
SilverCrest Wireless Headphones RFH 1863 Connection the Transmitter Cradle Figure: Detailed view of the transmitter cradle back panel To connect to Hifi equipment, use one of the supplied connection cables (see previous page, item 19 or item 20). Connect one end of the connection cable to the audio input jack (2). -
Page 11: Charging The Battery Of The Wireless Headphones
SilverCrest Wireless Headphones RFH 1863 Charging the Battery of the Wireless Headphones Please charge the battery before first use of the product. A charging cycle takes approx. four hours. Connect the plug-type power adapter to the transmitter cradle and to a wall outlet (see previous page). -
Page 12: Powering The Headphones On/Off
SilverCrest Wireless Headphones RFH 1863 Powering the Headphones On/Off If the battery level of the headphones is high enough (the power and charge indicator (15) on the transmitter must light green), you may remove the headphones from the transmitter cradle. -
Page 13: Adjusting The Volume
SilverCrest Wireless Headphones RFH 1863 Adjusting the Volume Press the VOL+ button (4) once or multiple times to increase the sound volume. Press the VOL- button (6) once or multiple times to decrease the sound volume. If you have connected your headphones to an external... -
Page 14: Setting The Wireless Channel
SilverCrest Wireless Headphones RFH 1863 Setting the Wireless Channel Under unfavourable circumstances, the audio signal may be subject to interference. This may happen when you are using a baby phone or other wireless headphones nearby. In this case it is recommended that you switch to another channel. -
Page 15: Receiving Radio Stations
SilverCrest Wireless Headphones RFH 1863 Receiving Radio Stations You may toggle the operation mode of your headphones to radio reception at any time. Power the headphones on by pressing the On/Off button (13) once. The power indicator (11) will light orange. -
Page 16: Using The Headphones With A Wired Connection
SilverCrest Wireless Headphones RFH 1863 Using the Headphones with a Wired Connection If your location is close to the audio source and you don’t wish to make portable use of your headphones, you may use them with a normal cable connection. -
Page 17: Battery Operation
SilverCrest Wireless Headphones RFH 1863 Battery Operation You may power both the transmitter cradle and the headphones by using conventional batteries. Batteries are not included in the package. Remove batteries when the device is not to be used for a long time. - Page 18 SilverCrest Wireless Headphones RFH 1863 Figure: Detailed view of the function switch To toggle between conventional batteries and internal rechargeable battery operation you must select the proper position with the function switch located inside the left earpiece (see the detailed figure above).
-
Page 19: Powering The Transmitter Cradle By Using Batteries
SilverCrest Wireless Headphones RFH 1863 Powering the Transmitter Cradle by Using Batteries The transmitter cradle battery compartment is located on the bottom. Remove any cable connections and turn the transmitter cradle upside down, holding it in your hand. Open the battery compartment by slightly pulling from the latch of the compartment cover. -
Page 20: Appendix
SilverCrest Wireless Headphones RFH 1863 Appendix Troubleshooting The headphones do not power on, there are no indicator lights. Recharge the built-in battery or insert conventional batteries. Verify the position of the function switch located in the left earpiece. For conventional battery operation it must be placed on the “DC2” position: for operation from the internal rechargeable battery it must be placed on “DC1”. -
Page 21: Technical Specifications
SilverCrest Wireless Headphones RFH 1863 Technical Specifications Model Wireless stereo headphones with scan radio tuner RFH1863 Frequency response 22 – 20,000 Hz 50 dB Signal to noise ratio R/L channel separation 30 dB Number of RF channels Modulation FM 863 - 865 MHz... - Page 22 SilverCrest Wireless Headphones RFH 1863 Non-Conformity of Radio Tuner Frequency Band The technical design of the device allows a frequency band beyond the permitted frequency band limits to be received. In some countries, different local regulations may apply for the assigned broadcasting frequency bands.
-
Page 23: Details Of Guarantee
SilverCrest Wireless Headphones RFH 1863 Details of Guarantee English - 21... - Page 24 SilverCrest Wireless Headphones RFH 1863 22 - English...
-
Page 25: Declaration Of Conformity
Wireless Headphone model: SilverCrest RFH 1863 is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to the Council Directive R&TTE 1999/5/EC. - Page 26 TARGA GmbH Lange Wende 41 D-59494 Soest www.silvercrest.cc...