Wi-Fi Hotspot Setup - D-Link DIR-505 User Manual

Section 6 - Wi-Fi Hot Spot Mode
The Wi-Fi Hotspot Setup page allows you to enter the settings of the Wi-Fi hotspot that the DIR-505 will connect to and
share access to. Please note that this is diferent from the wireless network created by the DIR-505 that you will connect your
devices to. After making your changes, click the Save Settings button.
Wireless This will state Wi-Fi Hot Spot Mode when in Wi-Fi Hot
Mode: Spot Mode. You can click the Site Survey button to look
for available hotspots to connect to. Selecting a wireless
network from the list that appears will automatically ill in
the settings below.
Wi-Fi HotSpot Enter the name of the Wi-Fi hotspot wireless network you
Network want to connect the DIR-505 to. You can use the Site Survey
Name: button to ill this in automatically.
Channel
Select the appropriate channel width to use from the
Width: dropdown box. If you are not sure what to use, leave the
setting on Auto.
Security
Select the wireless encryption used by the Wi-Fi hotspot you
Mode: are connecting to. You can use the Site Survey button to
ill in most of the information automatically; you can then
just enter the password(WEP Key or Pre-Shared Key) for the
Wi-Fi hotspot.
D-Link DIR-505 User Manual

Wi-Fi Hotspot Setup

117