Connecting Power Cable - Yamaha R-S300 Owner's Manual

Connecting power cable

VOLTAGE SELECTOR switch
(Central/South America models)
■ VOLTAGE SELECTOR switch
(Central/South America models only)
The VOLTAGE SELECTOR switch on the rear panel of
this unit must be set for your local main voltage BEFORE
plugging the power cable into the wall outlet.
Improper setting of the VOLTAGE SELECTOR switch
may cause damage to this unit and create a potential fire
hazard.
Select the switch position (left or right) according to your
local voltage using a straight slot screwdriver. Voltages are
AC 110-120/220-240 V, 50/60 Hz.
■ Connecting the power cable
Plug the power cable into the AC wall outlet after all other
connections are complete.
To the wall
outlet with the
power cable
CONNECTIONS
13
En