Installation Considerations - HP FCA2214DC PCI-X Installation Manual

Pci-x host bus adapters for linux, netware, and windows
Table of Contents

Advertisement

Installing the Adapter

Installation Considerations

If your system has an IDE hard disk, it may be assigned device number 80, which
is the boot device. If your system does not have an IDE hard disk, a parallel SCSI
HBA, or a RAID HBA, the first bootable FC hard disk configured (the one with
the lowest ID) is assigned device number 80 and becomes the boot device. This
HBA BIOS must be enabled if the boot device is connected to it.
If you have a selectable boot BIOS and want to boot to an FC hard disk, set the
motherboard BIOS parameters to None or Not Installed. The ROM BIOS on the
HBA automatically configures the FC peripherals.
Some system BIOS support selectable boot, which supersedes the HBA BIOS
selectable boot setting. Select the HBA Fibre Channel hard disk in the system
BIOS to boot from a Fibre Channel hard disk attached to it.
22
FCA2214/FCA2214DC PCI-X Host Bus Adapters for Linux, NetWare, and Windows Installation
Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks fca2214Storageworks fca2214dc

Table of Contents