Advertisement
2 Connecting to a Netware 4.11 Server
Windows for Workgroups
7 Execute INSTALL.EXE.
8 Specify the settings as listed below:
C:\NWCLIENT
Yes
Yes
C:\WINDOWS
No
3Com Fast Etherlink/Etherlink III Bus Master
9 Under the heading "Select the driver for your network board", insert the
3Com 3C339 drivers disk and set the path to "A:\NETWARE\CLIENT."
(If you have an HP preloaded HDD, set path to
"C:\Masters\LanDrv\3C339\NWCLIENT\)
10 Press "Enter" to continue the installation.
11 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
12 When the install utility is finished, press <CRTL><ALT><DEL> to restart
the machine.
13 After Windows loads, open the "NETWORK" folder, double-click the
"NETWORK SETUP" icon.
14 Select "Networks", and verify that "Novell Netware (Workstation Shell 4.0
and above)" is listed under "Install Windows support for the following
network only:" and click on "OK."
Advertisement
