Getting Started; Step 1: Insert The Battery Into The Digital Pen - Silvercrest GTA2000 User Manual And Service Information

Getting started

Proceed as follows to start using your pen pad quickly and easily.

Step 1: Insert the battery into the digital pen

To insert the battery proceed as follows:
1. Remove the cap.
2. Push the cover upwards slightly
and lift it off.
Do not push the cover too far
upwards, as the tabs at the front
could otherwise break off.
3. Remove the film from the sup-
plied battery and insert the bat-
tery. The plus pole (+) must al-
ways point towards the open end
of the pen!
Always ensure correct polar-
ity of the battery!
4. Place the tabs of the cover into
the front of the bottom section
and carefully push down until the
cover snaps into place on the
bottom section. Do not use any
force.
5. Replace the pen cap.
Silvercrest GTA2000 pen pad
English
11