Using Parental Ctrl; Setting Position; Using Input Signal; Using Auto Sync - HP Pavilion LC3700N User Manual

Channel Strength, available for Digital (Air)
■
channels only, helps you adjust the direction of the
digital broadcast antenna.
To use Channel Strength option:
1
With the Antenna set (refer to "Setting the antenna
using Air/Cable" in the previous topic), view the
digital broadcast channel on the TV.
2
Open the Menus and move to the Channel
Strength option in the Setup/Antenna Setup –
Digital menu. Press Select.
3
Move or adjust the direction of the digital
broadcast antenna until you obtain the maximum
signal strength. Press Select.

Using Parental CTRL

This option defines settings for Parental Control,
including setting the Secret Number (Secret No.); refer
to "Using Parental Controls" on page 65.

Setting Position

Use this Setup menu option to position the image on
the screen by setting horizontal and vertical values.
Settings depend on the Input source; this option is for
AV inputs only.
Select (view) the Input before selecting the menu option
and adjusting the position.

Using Input Signal

This menu option is for PC input mode only. It manually
sets the image input resolution from a PC.
The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case,
you have to set the correct signal manually. After
setting once, it displays properly when the same signal
(resolution) is input again.
PC input resolution pairs
640 X 400
640 X 480
1024 X 768
60
HP Pavilion LCD HDTV User's Guide
720 X 400
848 X 480
1280 X 768
You can select the Input Signal on the Setup
menu when receiving one of the 6 input
signals listed above.

Using Auto Sync

This option automatically adjusts the image from a PC.
Be sure to connect the PC to the TV and switch it on
before starting Auto Sync. When Auto Sync is
successful, the TV displays Completed. If not, Auto
Sync failed.
Auto Sync may fail even if "Completed"
■
displays.
Auto Sync may fail if the PC image has
■
low resolution, has unclear (black)
edges, or is moved while executing Auto
Sync.

Using Fine Sync

This option manual adjusts the image from a PC.
Ordinarily you can easily adjust the picture as
necessary using Auto Sync. In some cases, however,
manual adjustment is needed to optimize the image.
Fine Sync item
H-Pos.
V-Pos.
Clock
Phase
n
n
Description
Centers the image by moving
it to the left or right.
Centers the image by moving
it up or down.
Adjust when the image
flickers with vertical stripes.
Adjust when characters have
low contrast or when the
image flickers.