Troubleshooting The Hardware Installation; Verify Each Computers Identification; Verify Network Adapter Installation - D-Link DFE-690TXD User Manual

Cardbus pc card

Hide thumbs Also See for DFE-690TXD:

Table of Contents

Troubleshooting the Hardware Installation

If you experience any problems with the hardware installation, first

ascertain that all network cable connections are firm, that the proper

grade of cable is used for the network connection, and that the cable

makeup is correct (straight –– without un-needed crossovers in the

connector wiring). Check that the supporting hub is powered-on and

operating normally, and that the hub is properly qualified (under 10Base-

T and/or 100Base-TX standards).

If more than one computer on your network has the same "Computer

name," communications may be negatively affected. Also, each

computer must have the same "Workgroup" name to communicate

properly.

If your Network Adapter were not installed, including the Network

System Software or Device drivers, your network will not function

properly. Use these steps to verify that your Network Adapter is properly

installed.

1. Double-Click the "System" icon in the Control Panel.

2. Click the "Device Manager" tab on top of the "System

Table of Contents