Understanding Date Codes And Serial Numbers; Understanding Date Codes; Understanding Model Codes - Fujitsu SCALEOVIEW S17-2 Operating Manual

Understanding Date Codes and Serial Numbers

Understanding Date Codes and Serial Numbers
This section provides information on the date and model codes for the Encore Series and
Eclipse units.

Understanding Date Codes

A two-letter date code is stamped on the serial plate before the Serial Number. This code
shows the month and year of manufacture. Refer to the date code to determine the age of the
equipment for warranty purposes.
To determine the date code on an Encore or Eclipse unit, refer to the following tables.
Month Codes
A = January
B = February F = June
C = March
D = April
Year Codes
J = 2000
K = 2001 P = 2005 U = 2009
L = 2002 R = 2006 W = 2010
M = 2003 S = 2007 X = 2011

Understanding Model Codes

The Model Numbers are located as shown in
Figure 3-3
For Encore 300/500/550 units, the Model Number uses a two-letter and one-number model
code stamped on the serial plate. For Encore S units, the Model Number uses a two-letter and
a one-number model code listed on the UL Weights and Measures label that is located behind
the printer door.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
E = May J = September
K = October
G = July L = November
H = August M = December
N = 2004 T = 2008
on page 9, and Figure 3-6
Introducing the Encore/Eclipse Series
Figure 3-1 on page
on page 12.
7, Figure 3-2 on page 8,
Page 13