Overview Of System Installation - HP 9000 System Installation Manual

D Class System Installation

Overview of System Installation

Overview of System Installation
Installation of a basic system consists of the following procedures:
1. Install internal add-on options.
2. Connect the console or graphics monitor.
3. Connect the SCSI, network, and parallel cables.
4. Connect Remote Management (Access Port) card and the serial data cable for
the optional UPS.
5. Set the input voltage selector.
6. Connect system power cords.
7. Turn on power to the system.
8. Prepare for network connections.
9. Prepare for terminal connections.
The installation procedures start with "1. Install Internal Add-on Options". Refer to
the picture on the next page when connecting cables to rear panel connectors.
WARNING
The HP 9000 D Class Enterprise Server weighs about 49.5 kg (110 lbs). You
must use two people to lift the D Class server cabinet.
1-2