Installation; Operating Environment; Power Supply; Power Supply Specifications - Sony PFV-SP3300 Installation Manual

1-1. Operating Environment

Operating temperature
Performance temperature
Humidity
Mass: PFV-SP3300
HK-PSU03
. To prevent overheating of PFV-SP3300, ensure that
there is good air circulation around the unit.
. Do not put the unit in a place subject to excessive lamp
smoke, vapor, moisture, or dust.
c
Install in a stable location.
Installation on unstable or tilting surface may cause the
unit fall off, resulting in injury.
PFV-SP3300
Section 1

Installation

+5 dC to +40 dC
+10 dC to +35 dC
10 to 90 % (No condensation)
Approx. 10 kg
(Without the optional unit and
board)
Approx. 2 kg

1-2. Power Supply

1-2-1. Power Supply Specifications

Power voltage AC 100 V to 240 V
Power frequency 50 Hz or 60 Hz
Current consumption 3.5 to 1.5 A
Rush current AC 100 V IN : 15 A
AC 240 V IN : 55 A
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power on the supply side may operate or
this unit may not operate normally.

1-2-2. Recommended Power Cord

For customers in the U.S.A. and Canada
Required Part
1 Power cord, 125 V 10 A (2.4 m) : ! 1-557-377-11
For customers in the United Kingdom
Required Part
2 Power cord, 250 V 10 A (2.5 m) : ! 1-782-929-11
1
2
n
For the customers outside of the area as shown above,
please contact your local Sony Sales Office/Service Center.
w
. Use a specified power cord only.
Be sure to use a recommended power cord to avoid fire
and/or an electric shock.
. Ground the unit for your safety.
Be sure to attach a ground wire to avoid an electric shock.
AC inlet
AC inlet
1-1 (E)