Sharp XE-A507 Quick Start Manual page 2

4
Installing Paper Rolls
The register can print receipts and journals. For the printer, you must install the paper rolls
(receipt and journal paper rolls) provided with the register.
NOTE
• Install the paper roll in the printer. Be careful then to set the roll and cut the paper end correctly.
(How to set the paper roll)
To the printer
Incorrect
■ For receipt paper installation
1. Remove the printer cover.
2. Lift up the print roller arm of the receipt side.
3. Set a paper roll in the paper roll cradle of the receipt side as per the diagram.
4. Feed the end of the paper along with the paper positioning guides as per the diagram.
5. While holding down the paper, slowly close the print roller arm of the receipt side,
and push down the arm until you hear a click locking the arm.
6. Cut off the excess paper.
Print roller
arm
■ For journal paper installation
7. Lift up the print roller arm of the journal side.
8. Set a paper roll in the paper roll cradle of the journal side.
9. While holding down the paper, slowly close the print
roller arm of the journal side, and push down the arm
until you hear a click locking the arm.
10. Remove the paper holding plate from the spool.
Insert the end of the paper into the slit in the spool.
(Press the journal paper feed key to feed more paper
if required.)
Wind the paper two or three turns around the spool shaft.
11. Mount the paper holding plate onto the take-up spool.
Set the spool on the bearing, and press the journal
paper feed key to take up excess slack in the paper.
12. Replace the printer cover.
13. For the receipt paper, press the {
end comes out of the printer cover and clean paper appears.
(How to cut the paper end)
To the printer
Correct Correct Incorrect
Paper positioning
guides
Paper holding
plate
key to make sure the paper
5
Now, you are ready!
■ Prior to Making Entries
● Mode selection
In the REG mode, you can operate the entries. If another mode is selected, press the
a key to return to the REG mode.
● Clerk entry
Enter a clerk code (1 to 40) and press
the clerk code is not needed until the clerk is changed.) Example: 1
■ Registration Example (when selling department items by cash)
1. Select the REG mode.
2. Enter your clerk code.
3. Enter the price for the first department item.
For example for 5.00, enter
press the appropriate department key.
For department 21 to department 40,
press
d
key.
For department 41 and above, enter the department
code using numeric keys, and press
then enter the price and press
4. Repeat step 3 for all the department items.
5. Press Q
6. Enter the amount received from the customer.
(You can omit this step if the amount tendered is
the same as the subtotal.)
7. Press A
(when the amount received was not entered,
total amount is displayed) and the drawer is opened.
8. Tear off the receipt and give it to the customer with his or her change.
9. Close the drawer.
Spool
How to download Customer Support Tool:
Customer Support Tool can be downloaded from the Sharp web site.
Please visit the Sharp web site: http://www.sharpusa.com/registersoftware
When an error occurs:
When an error occurs with an alarm sound, press
error, press a
L key. (Once the clerk code is entered, re-entry of
5 :,
first before pressing the department
d ,
A .
to display the amount due.
, and the change due is displayed
l to clear the error. If you do not clear the
twice. The transaction will be finalized in subtotal void or cash sale.
L (Clerk no. 1 entry)
1 L
(Clerk code entry)
5 : 1
(Price and dept. 1)
8 2 5 d 2
(Price and dept. 22)
Q
(Amount tendered)
2 : 0
A
Printed in Korea T(TCADH2587BHZZ)