Playback Controls
Some discs start playing automatically after
the BD player loads the disc. If not, use the
remote control to start playback.
1
Press
to start playback.
•
To pause, press
•
To stop playback, press
•
To resume playback, press
2
When playback is finished, press
open the disc tray.
3
Remove the disc, then press
the disc tray.
4
Press
to turn off the BD player.
»
Resuming playback
•
Some discs do not support resume
playback function.
•
When
is pressed, the point where
it stopped is saved in the BD player's
memory. When
resumes from the point where it stopped.
Unless due to the following conditions:
•
When the disc tray is opened.
•
When the BD player's power is turned
off.
•
To cancel resume playback, press
WARNING
Do not leave the disc inside the BD player.
26
.
.
again.
to
to close
is pressed, playback
twice.
Forward or Reverse
Playback
BD
DVD
AVCHD
VCD
1
During playback, press
or forward playback.
2
Press the button repeatedly to switch
scanning speed (2x, 4x, 8x, 16x, 32x, 64x,
128x).
Note:
You can also reverse or forward scan by holding
the button down. Normal playback resumes
when the button is released.
3
To resume to normal playback, press
Some discs automatically resumes
normal playback when switching to a
new chapter.
Notes:
•
When scanning BD, DVD, and VCD discs, no
sound output is produced.
•
Sound is output during CD disc scanning.
or
to reverse
.