Chapter 3 Standard Operations
>
3.1 Power ON Control
Procedure
1
2
3
P3AM-3042-06ENZ0
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Press the power switch ( ) of the controller enclosure.
Controller enclosure POWER LED turns on.
W h e n dr i v e en c l o s u r es a r e i ns ta l l e d , t h e po w e r t u rn s o n
automatically.
Power switch
After a few minutes, check that controller enclosure's READY LED is lit up.
Check that all enclosure's POWER LED and READY LED are lit up.
LED for
drive enclosure
LED for
controller enclosure
Drive enclosure
Drive enclosure
Controller enclosure
Drive enclosure
Drive enclosure
Controller enclosure
73
End of procedure
Copyright 2010 FUJITSU LIMITED