Samsung SCX-812x Series User Manual page 146

Message Meaning
[color] toner The toner cartridge
cartridge Failure does not supply
[error number]: enough toner.
Please open/close
door.
[color] toner The toner cartridge
cartridge is not you have installed is
compatible. Check not for your machine.
user's guide.
[color] toner The toner cartridge is
cartridge is not not installed or the
installed. Install it. cartridge is not
properly installed.
DCF Failure [error There is a problem in
number]: the dual capacity
feeder.
Check internal DCF
connection.
DCF Failure [error There is a problem in
number]: the dual capacity
feeder.
Please open/close
[tray number].
End of life, Replace The life of the imaging
with new [color] unit expires totally.
imaging unit.
End of life, Replace The toner cartridge
with new [color] has run out. The
toner cartridge. machine stops
printing. Some
amount of toner may
remain in the cartridge
even when the
machine stops
printing.
.
Suggested solutions
• Thoroughly roll the
cartridge five or six
times to distribute the
toner evenly inside the
cartridge (see
"Redistributing toner"
on page 125).
• Open and close the
front door. Or check
whether the sealing
tape of the toner
cartridge is removed or
not (see "Replacing
the toner cartridge" on
page 126).
• If the problem persists,
call for service.
Install a
Samsung-genuine toner
cartridge designed for
your machine (see
"Check the type of the
toner cartridge for your
machine (see "Supplies
and accessories" on
page 160)." on
page 126).
Install the toner cartridge.
If it is already installed,
try to reinstall the toner
cartridge. If the problem
persists, call for service.
Open and close the dual
capacity feeder, or check
the dual capacity feeder
connection with the
machine. If the problem
persists, call for service.
Open and close the tray.
If the problem persists,
call for service.
Replace the imaging unit
with a Samsung-genuine
imaging unit (see
"Replacing the imaging
unit" on page 129).
This message appears
when the toner is
completely empty, and
your machine stops
printing. Replace the
toner cartridge with a
Samsung-genuine toner
cartridge (see "Replacing
the toner cartridge" on
page 126).
Troubleshooting_ 146
Message Meaning
End of life, Replace The life of the transfer
with new transfer belt unit expires
belt unit. totally.
Engine System There is a problem in
Failure [error the engine system.
number]:Please
open/close door.
Engine System There is a problem in
Failure [error the engine system.
number]:Turn off
then on.
Fax modem card is The optional fax kit is
not installed. not installed.
Install the card.
Fax System Failure There is a problem in
[error the fax system.
number]:Turn off
then on.
FDI device is not The FDI optional FDI
installed. Install kit is not installed.
the device.
Feed door is The door is not
opened. Close it. securely latched.
Finisher door is The finisher door is
open. Close it. not securely latched.
Finisher Error There is a problem in
[error the finisher.
number]:Please
open/close door.
Finisher Error There is a problem in
[error the finisher.
number]:Turn off
then on.
Finisher System There is a problem in
Failure [error the finisher.
number]:Please
open/close door.
Finisher System There is a problem in
Failure [error the finisher.
number]:Turn off
then on.
Front door is open. The door is not
Close it. securely latched.
Fuser Unit Failure There is a problem in
[error the fuser unit.
number]:Turn off
then on.
Suggested solutions
Replace the transfer belt
unit with a
Samsung-genuine
transfer belt unit, call for
service.
Open and close the front
door. If the problem
persists, call for service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Install the optional fax kit.
If it is already installed,
try to reinstall the optional
fax kit. If the problem
persists, call for service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Install the optional FDI
kit. If it is already
installed, try to reinstall
the optional FDI kit. If the
problem persists, call for
service.
Close the door until it
locks into place.
Close the door until it
locks into place.
Open and close the
finisher door. If the
problem persists, call for
service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Open and close the
finisher door. If the
problem persists, call for
service.
Turn the machine off and
back on again. If the
problem persists, call for
service.
Close the door until it
locks into place.
Turn the machine off and
back on again. If the
problem persists, call for
service.