Samsung 5 series Installation Manual page 13

Warning
When you use the DC power output jack, you have to check the standard output power of
STB(SBB) and you should use the DC power within the standard output(Class 2 Wiring-5V
DC/2.5A (12V DC/1.5A).
- For 5V SBB, SBB load current must not exceed 2.5A.
- For 12V SBB, SBB load current must not exceed 1.5A.
- The initial output is 5V.
- For 12V SBB, you have to change the output voltage to 12V in order to use the power.
Changing the Output Voltage
1. Press the POWER button.
The TV is powered on.
➣
2. Press the following remote control
buttons in order.
➣ The Hotel Option menu appears.
. Press the ▲ or ▼ button to select
"DC Power Output".
Press the ◄ or ►button to select
"12V" or "5V".
. Remove the power cord then plug it
back in again.
➣ The voltage change is applied when you turn the TV on again after changing the
Interactive mode Option setting.
BN68-02157K-x0-Eng.indd 10
Hotel Mode Sub AMP Volume
On
SI Vendor Sub AMP Mode
Samsung
Power On Channel 1 Logo Time
Power On Source Time Format
ATV
Power On Volume 10 PMOLED Test
Min Volume PMOLED Mormal Dimming
0
Max Volume 100 PMOLED StandBy Dimming
Panel Button Lock Audio Loop In
Off
Music Mode (AV) Clone Hotal Menu
Off
Music Mode (PC) Menu Display
Off
Music Mode (Comp) Hotel Logo
Off
Music Mode Backlight Hotel Logo DL
Off
RJP Prlorlty(AV) Logo Display Time
1
RJP Prlorlty(PC) Powe r On Option
2
RJP Prlorlty(HDML) Auto PC

English - 10
Energy Saving
1 Off
DC Power Output
2 5 Voits
Manual Clone : TV to USB
Clone : USB to TV
12 Hour
Off Welcome Message

2
Off
Interactive
On
Off
5 sec
Lsst Option
Off
2009-04-16 ¿ÀÈÄ 5:03:19