To Resume From Sleep/Standby Or Hibernation - Panasonic CF-C1 Series Reference Manual

Sleep/Standby or Hibernation Functions

To resume from sleep/standby or hibernation

1
Open the display, or slide the power switch (A).
<CF-C1 Series>
In the default setting, the Windows password will be requested to resume.
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
15 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the keyboard (except for password input), Touch Pad, screen, or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Close or open the display.
• Shut down or restart Windows.
• Enter sleep /
Windows 7
• <Only for CF-F9 Series>
Operate the drive power/open switch.
• Operate the wireless switch.
• Insert and remove the SD/SDHC Memory Card
If the computer enters sleep while a USB keyboard or mouse is connected, touching the USB keyboard
Windows 7
keys or mouse will resume the computer.
NOTE
<Only for model with Bluetooth>
After resuming from
working" may appear.
Click [Close program].
If Bluetooth connections are cut off, click
[Bluetooth Settings], and connect to the Bluetooth devices again.
*1
If the speakers are muted, beeps do not sound.
*2
Windows 7
SD/SDHC/SDXC Memory Card.
<CF-F9 Series>
A
standby or hibernation (Wait approximately one minute).
Windows XP
sleep /
Windows 7
Windows XP
Windows 7
*2
.
standby or hibernation, the message "TosBtMng has stopped
(Start)/
Windows XP
[start] - [All Programs] - [Bluetooth] -
64