Setup Menu; Audio Setup - Kenwood DNX6140 Instruction Manual

Setup Menu
You can set up various receiver parameters.
Setup Menu
Displays the Setup menu to set various functions.
D
Display the control screen of any source
Touch any source button on the "Source Select"
screen.
D
Display the Setup Menu
D
Select the setup item
IIJ
The selected setup screen appears.
W
Scrolls the setup menu.
~
~
• [Audio Setup] and [AV Interface] options can be locked.
The key mark (8) is displayed in reverse video for the
locked option. See <Setup Memory> (page 84).
Audio Setup
You can setup a speaker network, etc.
D
Display the Audio Setup screen
Touch
iJ'/!l'r:Ji!!ilH ' .
in the "Setup
Menu" screen (page 60).
~
• [Audio Setup] cannot be selected under the following
conditions:
- When no source is selected.
- When dual zone function is set to on. See <Zone
Control> (page 88).
D
Setup each item
III
IIJ
Selects the speaker to set the crossover. See
<Crossover Network Setup> (page 61).
W
Sets the availability of subwoofers. This
can be selected only when Preout is set to
"Subwoofer". See <System Setup> (page
64).
[l]
Selects the type of front speakers.
"Standard": Setup for general diameter
speakers
"Narrow": Setup for small diameter
speakers
"Middle": Setup for middle diameter
speakers
"Wide": Setup for large diameter
speakers
rn
Switches to the crossover setup screen.
See <Crossover Network Setup> (page 61).
60 DNX6140/DNX6000EX/DNXS140/DDXS14/DDXS034/DDXS034BT