• For configuration, the following web browsers are supported: • Microsoft Internet Explorer 6.0 and higher ® ® • Mozilla Firefox 3.0 and higher • Google Chrome 2.0 and higher ™ • Apple Safari 3.0 and higher D-Link DAP-2310 User Manual...
In the case where an employee leaves the company, the network administrator is able to remove the previous employee from the authorized list to avoid compromising the network. D-Link DAP-2310 User Manual...
Page 6
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2310 User Manual...
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2310 User Manual...
Wireless Basics D-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it.
OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DAP-2310 will automatically sense the best possible connection speed to ensure the greatest possible speed and range.
Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DAP-2310 User Manual...
This light will be solid green when the unit is powered on. WLAN LED This light will be flickering green when the 2.4GHz frequency is in use. LAN LED This light will be flickering green when there is active LAN traffic. D-Link DAP-2310 User Manual...
Section 2 - Installation Hardware Overview Connections LAN Port Connects the DAP-2310 to a switch or PC. Reset Reset the Access Point. Power Receptor Receptor for Power Adapter. D-Link DAP-2310 User Manual...
WDS with AP functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernet- Wireless Client enabled device AP acts as repeater to extend to wireless coverage. AP Repeater D-Link DAP-2310 User Manual...
Note: You can also connect the DAP-2310 directly to the computer that will be used for configuration. The LAN LED will illuminate to indicate a proper Ethernet connection. 3. Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310. D-Link DAP-2310 User Manual...
Note: If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password field blank by default and click Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-2310 User Manual...
(not activate) your configuration changes. You may change settings to multiple pages before activating. Once you are finished, click the Configuration button located at the top of the page and then click Save and Activate. D-Link DAP-2310 User Manual...
All devices on the network must share the same channel. To change the channel, first toggle the Auto Channel Selection setting to Channel: Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-2310 User Manual...
Page 18
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server. Select 802.1x to secure your network using 802.1x authentication. D-Link DAP-2310 User Manual...
To change the channel, use the drop-down menu to make the desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.) Channel Width: Indicates whether the device is capable of 20MHz operation only or both 20MHz and 40MHz operation. D-Link DAP-2310 User Manual...
Page 20
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2310 User Manual...
Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz. Remote AP Enter the MAC addresses of the APs on your MAC Address: network that will serve as bridges to wirelessly connect multiple networks. D-Link DAP-2310 User Manual...
Page 22
Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2310 User Manual...
Auto 20/40 MHz. Site Survey: Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System or WPA-Personal. D-Link DAP-2310 User Manual...
Page 24
Check to enable clone MAC. This feature will allow you to change the MAC address of the access point to the MAC address of a client. MAC Source: Select the MAC source from the drop-down menu. MAC Address: Enter the MAC address that you would like to assign to the access point. D-Link DAP-2310 User Manual...
Use the pull-down menu to choose Open System or WPA-Personal. Select Open System to communicate the key across the network. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required. D-Link DAP-2310 User Manual...
Key Index drop- down menu. **Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F. *ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-2310 User Manual...
You can select Periodical Key Change to have the Change: access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key. When you select WPA-Personal, please enter a PassPhrase: PassPhrase in the corresponding field. D-Link DAP-2310 User Manual...
Network Access Enable or disable Microsoft Network Access Protection: Protection. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2310 User Manual...
(300 is the recommended value). A lower interval may reduce data transfer rates. RADIUS Server: Enter the IP address of the RADIUS server. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2310 User Manual...
Enter the IP address of the gateway in your network. Gateway: If there is a gateway in your network, please enter an IP address within the range of your network. DNS: Enter the DNS IP address used here. D-Link DAP-2310 User Manual...
DAP-2310. When Auto is selected, the other fields here will be grayed out. IP Address: Enter the LAN IPv6 address used here. Prefix: Enter the LAN subnet prefix length value used here. Default Enter the LAN default gateway IPv6 address used Gateway: here. D-Link DAP-2310 User Manual...
*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specifications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-2310 User Manual...
Page 33
For most users, a limit of 10 is recommended. The default setting is 20. The choices available are 130,117,78,65,58.5,54, 52,48, 39,36, 26,24, 19.5,18, 13,12, 9, 6.5,6, Select the multicast rate for 2.4G band. Multicast Rate for 11, 5.5, 2 or 1. 2.4G Band D-Link DAP-2310 User Manual...
System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters, please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed description of the O802.1x parameters, please go to page 28. D-Link DAP-2310 User Manual...
Page 35
RADIUS Server: When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must configure RADIUS Port and RADIUS Secret. RADIUS Port: Enter the RADIUS port. RADIUS Secret: Enter the RADIUS secret. D-Link DAP-2310 User Manual...
The VLAN List tab displays the current VLANs. VLAN Status: Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. D-Link DAP-2310 User Manual...
The name of the port is displayed in this column. Tag VID: The Tagged VID is displayed in this column. Untag VID: The Untagged VID is displayed in this column. PVID: The Port VLAN Identifier is displayed in this column. D-Link DAP-2310 User Manual...
VLAN Status: Use the radio button to toggle to Enable. Provide a number between 1 and 4094 for VLAN ID: the Internal VLAN. VLAN Name: Enter the VLAN to add or modify. D-Link DAP-2310 User Manual...
PVID settings. Click the Save button to let your changes take effect. VLAN Status: Use the radio button to toggle between Enable and Disable. PVID Auto Use the radio button to toggle PVID auto assign Assign Status: status to Enable. D-Link DAP-2310 User Manual...
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. The choices include All, Valid, Neighbor, Rogue, AP List: and New. Detect: Click this button to initiate a scan of the network. D-Link DAP-2310 User Manual...
Enter the end time for your rule. Add: Click to add the rule to the list. Schedule Rule This section will display the list of created List: schedules. Save: Click the Save button to save your created rules. D-Link DAP-2310 User Manual...
Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64. Status: Toggle the drop-down menu between Enable and Disable. RADIUS Displays the list of users. Account List: D-Link DAP-2310 User Manual...
The ARP Spoofing Prevention feature allows users to add IP/MAC address mapping to prevent arp spoofing attack. ARP Spoofing This check box allows you to enable the arp Prevention: spoofing prevention function. Gateway IP Enter a gateway IP address. Address: Gateway MAC Enter a gateway MAC address. Address: D-Link DAP-2310 User Manual...
Reserve certain bandwidth for each station: for future clients. Allocate The weight of 11b/g/n and 11a/n client are different BW 10%/20%/70% ; 20%/80%. AP will distribute for a/b/g/n different bandwidth for 11a/b/g/n clients. stations: D-Link DAP-2310 User Manual...
Page 45
Downlink Enter the limitation of the downloading speed in Speed: either Kbits/sec or Mbits/sec for the rule. Uplink Speed: Enter the limitation of the uploading speed in either Kbits/sec or Mbits/sec for the rule. D-Link DAP-2310 User Manual...
Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current Array This table displays all the current array members. Members: The DAP-2310 AP array feature supports up to eight AP array members. D-Link DAP-2310 User Manual...
Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. Current This table displays all the current array members. Members: The DAP-2660 AP array feature supports up to eight AP array members. D-Link DAP-2310 User Manual...
Select this option to specify the other advanced Functions: settings that the APs in the group will inherit. Administration Select this option to specify the administrative Settings: settings that the APs in the group will inherit. D-Link DAP-2310 User Manual...
This value must be between 1 and 24 hours. RSSI Threshold: Select the RSSI threshold value here. This value is listed in the drop-down menu in increments of 10% from 10% to 100%. RF Report Enter the RF report frequency value here. Frequency: D-Link DAP-2310 User Manual...
In this window, users can view and configure the AP array’s load balancing settings. Click the Save button to accept the changes made. Enable Load Select to Enable or Disable the load balance Balance: feature here. Active Enter the active threshold value here. Threshold: D-Link DAP-2310 User Manual...
Last Active Day: Select the last active date for this ticket here. Year, Month and Day selections can be made. User Limit: Enter the maximum amount of users that can use this ticket at the same time. D-Link DAP-2310 User Manual...
Enter the username for the new account here. Password: Enter the password for the new account here. Group: Select the group for the new account here. Options to choose from are Manager and Guest. Guest accounts will have limited access. D-Link DAP-2310 User Manual...
Select to Enable or Disable the accounting mode Mode: here. Accounting Enter the accounting server’s IP address here. Server: Accounting Enter the accounting server’s port number here. Port: Accounting Enter the accounting server’s shared serect here. Secret: D-Link DAP-2310 User Manual...
Identity: Enter the identity’s full path string here. Alternatively, select the Auto Copy checkbox to automatically add the generic full path of the web page in the identity field. D-Link DAP-2310 User Manual...
Ticket option. Server: Enter the POP3 server’s IP address or domain name here. Port: Enter the POP server’s port number here. Connection Select the connection type here. Options to choose Type: from are None and SSL/TLS. D-Link DAP-2310 User Manual...
Upload button to initiate the upload. Upload picture In this field the path to the image file, that will be from file: uploaded, will be displayed. Alternatively, the path can be manually entered here. D-Link DAP-2310 User Manual...
Wireless clients will be redirected to this web site prior and after authentication. Click the Save button to accept the changes made. Select this checkbox to enable the Web redirection Redirection: feature. Web Site: Enter the destination web site’s address here. D-Link DAP-2310 User Manual...
Enter the IP address of the gateway on the network. WINS: Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-2310 User Manual...
Page 59
Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time The lease time is the period of time before the DHCP server will assign new IP addresses. (60-31536000 sec): D-Link DAP-2310 User Manual...
You can edit or delete the device in this list. Assigned MAC Enter the MAC address of the device requesting Address: association here. Subnet Mask: Define the submask of the IP address specified in the “IP Assigned From” field. D-Link DAP-2310 User Manual...
Page 61
IP address of a network computer with a dynamically assigned IP address, if applicable. DNS: Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses. Domain Name: Specify the domain name for the network. D-Link DAP-2310 User Manual...
The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool. Binding MAC The MAC address of a device on the network that is within the DHCP static IP address pool. Address: Assigned IP The current corresponding DHCP-assigned static IP address of the device. Address: D-Link DAP-2310 User Manual...
Once created, click the Browse button and locate your file. Select it and then click Upload. Download ACL Click Download to export the ACL to a file on File: your computer. D-Link DAP-2310 User Manual...
Wireless devices can still send data to the Ethernet. Internal Station The default value is Enable, which allows stations Connection: to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP. D-Link DAP-2310 User Manual...
Save button to let your changes take effect. Downlink The downlink bandwidth in Mbits per second. Bandwidth: Uplink Uplink Bandwidth: The uplink bandwidth in Bandwidth: Mbits per second. D-Link DAP-2310 User Manual...
This acts to de-prioritize streams that exhibit bulk transfer characteristics, such as file transfers, while leaving interactive traffic, such as gaming or VoIP, running at a normal priority. D-Link DAP-2310 User Manual...
The downlink bandwidth in Mbits per second. Bandwidth: This value is entered in the Uplink/Downlink Setting window. Uplink Uplink Bandwidth:The uplink bandwidth in Bandwidth: Mbits per second. This value is entered in the Uplink/Downlink Setting window. D-Link DAP-2310 User Manual...
Section 3 - Configuration Status Device Information Device This read-only window displays the configuration Information: settings of the DAP-2310, including the firmware version and the device's MAC address. D-Link DAP-2310 User Manual...
Band: Displays the wireless band that the client is connected to. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Power Saving Displays the status of the power saving Mode: feature. D-Link DAP-2310 User Manual...
Displays the SSID of the client. MAC: Displays the MAC address of the client. Authentication: Displays the type of authentication being used. Signal: Displays the client's signal strength. Status: Displays the status of the power saving feature. D-Link DAP-2310 User Manual...
Section 3 - Configuration Stats Ethernet Ethernet Traffic This page displays transmitted and received Statistics: count statistics for packets and bytes. D-Link DAP-2310 User Manual...
Section 3 - Configuration WLAN Traffic WLAN Traffic This page displays wireless network statistics Statistics: for data throughput, transmitted and received frames, and frame errors. D-Link DAP-2310 User Manual...
The log information includes but is not limited to the following items: cold start AP, upgrading firmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs. D-Link DAP-2310 User Manual...
Enter your email username. Password: Enter your email password. Confirm Password: Enter your email password again. Schedule: Select when to send the log to your email (in hours). You will receive an email when the log is full too. D-Link DAP-2310 User Manual...
Section 3 - Configuration Maintenance Administration Settings Check one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next five pages. D-Link DAP-2310 User Manual...
Limit Check to enable the Limit Administrator IP Administrator IP: address. IP Range: Enter the IP address range that the administrator will be allowed to log in from and then click the Add button. D-Link DAP-2310 User Manual...
Each of the five main categories display various hidden administrator parameters and settings. The name of the device. The default name is System Name: D-Link DAP-2310. Location: The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-2310 User Manual...
When changing your password, enter the new password here. The password is case-sensitive. “A” is a different character than “a. ” The length should be between 0 and 12 characters. Confirm Enter the new password a second time for Password: confirmation purposes. D-Link DAP-2310 User Manual...
Status is enabled by default. Uncheck the box to disable the console. Console Select the type of protocol you would like to use, Protocol: Telnet or SSH. Timeout: Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-2310 User Manual...
Public Community Enter the public SNMP community string. String: Private Enter the private SNMP community string. Community String: Trap Status: Check the box to enable Trap Status. Trap Server IP: Enter the Trap Server IP address. D-Link DAP-2310 User Manual...
The Central WiFiManager section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of management. Central WiFiManager and AP Array are mutually exclusive functions. Enable Central Select to enable or disable the Central WiFiManager: WiFiManager. D-Link DAP-2310 User Manual...
This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version firmware available.
Configuration configuration to your local computer. Note File: that if you save one configuration with the administrator’s password now, after resetting your DAP-2310, and then updating to this saved configuration file, the password will be gone. D-Link DAP-2310 User Manual...
You can either manually set the time for your AP and Time here, or you can click the Copy Your Computer’s Manually: Time Settings button to copy the time from the computer you are using (Make sure that the computer’s time is set correctly). D-Link DAP-2310 User Manual...
Restart the Device: Click Restart to restart the DAP-2310. Restore to Factory Click Restore to restore the DAP-2310 back Default Settings: to factory default settings. Click Clear to remove any loaded language Clear Language Pack: packs. D-Link DAP-2310 User Manual...
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet nor do you have to be connected to the Internet.
Page 88
• Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included ® with your firewall software for more information on disabling or configuring it. D-Link DAP-2310 User Manual...
Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). D-Link DAP-2310 User Manual...
Page 90
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-2310 User Manual...
Page 91
• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management.
* Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DAP-2310 User Manual...
Page 93
• Operating: 0˚C to 40˚C • Storing: -20˚C to 65˚C Humidity • Operating: 10%~90% (non-condensing) • Storing: 5%~95% (non-condensing) Certifications Dimensions • L = 148mm • W = 111mm • H = 28mm Weight • 227g D-Link DAP-2310 User Manual...