Burst Settings - Sony Cyber-shot DSC-T110 Instruction Manual

Burst Settings

You can select single-image mode or burst mode.
1 Lower the lens cover to switch to shooting mode.
2
t (Burst Settings) t desired mode
(Single)
(Burst)
Shoots a single image.
Shoots up to 100 images in succession when you press and hold
down the shutter button.
Notes
• The Burst mode is not available in Easy Mode, Sweep Panorama, Movie
Mode, or Smile Shutter.
• The flash is set to [Off].
• When recording with the self-timer, only a single image can be shot.
• The recording interval becomes longer, depending on the setting for the
image size.
• When the battery level is low, or when the internal memory or the
memory card is full, the Burst stops.
• [Focus], [White Balance] and [EV] are adjusted for the first image, and
these settings are also used for the other images.
54 GB