Sony AVD-K150B Service Manual page 9

Connections
TV and Decoder (or Set Top Box) Connections
Make one of the following connections, depending on the capabilities of your existing equipment.
Rear of TV
Tips
•
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/VCR Receiver. Use one of the connections
described below.
•
Please refer to the manuals of your TV, VIDEO,
Stereo System or other devices as necessary to
make the best connections.
Caution
− Make sure the DVD/VCR Receiver is connected
directly to the TV. Select the correct AV input on your
TV.
− Do not connect your DVD/VCR Receiver to TV via
your VIDEO. The DVD image could be distorted by
the copy protection system.
Basic connections (AV)
Connect the EURO AV1 (TO TV) on the rear panel
1
of the DVD/VCR Receiver to the scart input socket
on the TV using a SCART lead (E).
Some TV broadcasters transmit encoded television
2
signals which you can only see with a purchased or
rented decoder.You can connect such a decoder
(descrambler) to the DVD/VCR Receiver (D).
AVD-K150B/K150E/K150G/K150N/K150R
SCART INPUT
AERIAL
Basic connection (RF)
Connect the aerial cable (A) from your indoor/ out-
1
door aerial to ANTENA IN jack on the rear panel of
DVD/VCR Receiver.
Connect the supplied RF cable (R) from the
2
ANTENA OUT jack on the rear panel of DVD/VCR
Receiver to your television's Aerial Input.
Notes
When you connect the DVD/VCR Receiver to your TV,
be sure to turn off the power and unplug both units from
the wall outlet before making any connections.
9