Using The Timer Menu - Sony TRINITRON KV-27FS100 Service Manual

Using the Timer
To access the Timer menu, refer to the following steps:
To Display To Highlight
Set your TV to the current day and time. Press
Current Time
Use the
1
Press
2
✍
You must set the Current Time before you can use Timer 1 or Timer 2.
Use the timers to program your TV to turn on and off by day, time, duration and
Timer 1 and
channel. The timers duration is maximum of 6 hours. When the channel is fixed,
Timer 2
Scheduled it is not necessary to set the channel.
viewing
Use the
1
Use the
2
channel, then press
has been set, and the timer light on the front panel of the TV should be
turned on.
Press
3
✍
Select Off to turn off the Timer (your previous settings will be saved).
✍
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
Menu
To Select
F or f buttons to enter the correct day and time, then press
to exit the menu.
F or f buttons to select Timer 1 or Timer 2, then press
F or f buttons to enter the desired day, start time, duration, and
. The timer status should be On when the Timer
to exit the menu.
Using the Menus
Video Audio Channel Parent Timer Setup
Timer 1 : Off
Timer 2 : Off
Program
Current Time
Program the time
Move: Select:
to open Current Time menu:
.
Basic
: AM
End:
.
35