Adjust Display Brightness; Product Information; Specifications - Philips DCM3175 User Manual

Adjust display brightness

Note
•
You can adjust the display brightness in standby mode
only.
In standby mode, press RDS/DISPLAY
repeatedly to adjust display brightness.
• Full brightness (100%)
• Half brightness (70%)
• Brightness low (40%)
9 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Maximum Output
Power
Frequency Response
Signal to Noise Ratio
Audio In Input
Disc
Laser Type
Disc Diameter
Support disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
Signal to Noise Ratio
2 x 15W + 30W RMS
45 Hz - 20 kHz, ± 3 dB
> 77 dBA
600mV RMS 22 k
Semiconductor
12 cm
CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
24 Bits / 44.1 kHz
< 0.8% (1 kHz)
45 Hz -20 kHz
(44.1 kHz)
> 77 dBA
EN 17