Setting the Language Press to move through the selection. Select a language, then press SET to apply. HP SB360 Setting the Date & Time Press to move through the selection. Press keys to change the value for the date and time.
Page 2
Setting the Language Press to move through the selection. Select a language, then press SET to apply. HP SB360 Setting the Date & Time Press to move through the selection. Press keys to change the value for the date and time.
Getting Started Parts of the Camera 1. Shutter button 2. Flash 3. Stabilizer 4. LED indicator 5. Power button 6. Self-timer LED / AF Assist Lamp 7. Microphone 8. Zoom Lens 9. Zoom buttons 10. Strapring 11. Function / Delete button 12.
Setting the Display Language / Date & Time When using the camera for the first time after purchasing, be sure to choose a language and set the date & time before using the camera. Setting the Display Language Turn the power on, and set the camera to the Setup Menu.
Page 5
Setting the Date & Time Turn the power on, and set the camera to the Setup Menu. Select [ Date & Time]. Press to select [Date & Time] then press SET button to launch the submenu. Set date and time. Press to change the value of the cursor located.
Using the Menus When the menu is displayed, use the 4-way navigation control and the SET button to move through menu selections and apply your desired settings. To close the menu anytime, press the menu button again Using the Shooting Menu Turn the power on, and set the camera to Shooting mode.
Page 7
Using the Setup Menu You can access the Setup menu whether you are in Shooting or Playback mode. The Setup menu allows you to configure general camera settings. Press to launch the Record/ Playback Menu. Use the keys to change the menu tab to Setup menu.
Page 8
Using the Function Menu The Function Menu is used to adjust capture settings in Shooting Mode. It contains My Mode, Resolution, Quality, EV Compensation, White Balance, ISO, Metering, and Color Mode. Press the FUNC button of your camera to launch the Function Menu. Press the FUNC button again to close the menu.
Page 9
Setting the Language Press to move through the selection. Select a language, then press SET to apply. HP SB360 Setting the Date & Time Press to move through the selection. Press keys to change the value for the date and time.
Page 10
Setting the Language Press to move through the selection. Select a language, then press SET to apply. HP SB360 Setting the Date & Time Press to move through the selection. Press keys to change the value for the date and time.