Using The Camera; Installing The Batteries - HP c150w User Manual

Sounds
Frequency
Power Save
Language
Date/Time
Format
Reset All
V
Note: The camera will remain the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.
2. Insert 2 x AAA alkaline batteries into the camera.
3. Close the battery door.
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. The memory can be gained with a micro SD memory
card (not included).
Follow the instructions below to insert the optional micro SD memory card into the camera.
1. Turn off the camera first.
2. Open the battery door (please make sure the battery door was unlocked before open).
3. Insert the micro SD card into the camera.
Note: There is only one right direction to insert the micro SD memory card into the slot. Do not
force the card into the memory card-slot, it may damage both the camera and the micro SD
memory card.
Note: The micro SD memory card must be formatted before taking photographs. See the following
sections for more information.
Off/On
50Hz / 60Hz
Off / 1Minute / 3 Minutes
English/ French/
Deutsch/Italian/Spanish/
Portuguese/Japanese
YY/MM/DD
Yes/No
Yes/No
e s r o i n
Sounds setting
Select power frequency in
your location
Auto power off selection
Display language selection
Date or time setting
Format the memory location
selection.
Reset all setting
S e e
6
h t e r i f m w a e r v e s r o i n